Solarman + Alpha Innotec

What Zerofy can do with Solarman and Alpha Innotec

In practice

• Hot water is the simplest heat store: Autopilot can use the hot-water boost of your Alpha Innotec heat pump to heat water in hours with surplus.
• A heat pump draws roughly 1–3 kW while running. A Solarman balcony system covers only a small part of that, a rooftop system (Solarman systems range up to 12 kW) much more on sunny days.
• Zerofy gets new Solarman data every 5 minutes. Heat pumps shouldn’t switch often, so set a minimum runtime in Autopilot.
• If the PV-Ready contact is wired to your inverter as well, decide which system triggers the hot-water run so the tank isn’t heated twice; with Zerofy the boost follows your inverter’s live surplus from its cloud, without extra wiring.

What Solarman and Alpha Innotec offer on their own

Solarman: Solarman offers no heat pump or SG Ready control.

Alpha Innotec: All alpha innotec heat pumps with Luxtronik 2.0 or newer are PV-Ready and SG-Ready: a potential-free contact from the inverter (or a relay) starts the heat pump, which then heats at full power up to the return-temperature limit and makes hot water up to the maximum flow temperature. alpha innotec doesn’t name specific inverters; any inverter or energy manager with a switching contact works.

Zerofy connects the two: it reads Solarman production and controls your Alpha Innotec heat pump to match, together with your other devices in one app, with dynamic tariffs and forecast-based Smart mode.

Setting up Solarman and Alpha Innotec in Zerofy

1. Connect Solarman

Zerofy connects to SOLARMAN Smart with your account login and reads PV production, meter (consumption) and battery data of your plant; a Solarman P1 meter reader can also be added as a separate electricity meter.

1. Make sure your logger is online and your plant is set up in SOLARMAN Smart.
2. In Zerofy, add an inverter, choose Solarman and log in with your SOLARMAN Smart e-mail and password.
3. Optional: if the plant has a P1 meter, add it in meter setup under Solarman and select it from the discovered devices.

Good to know: Zerofy finds devices per plant, so a P1 meter must be assigned to a plant in SOLARMAN Smart. If a plant has both an inverter and a P1 meter, Zerofy offers two meters with the same plant-level values; connect only one of them.

Step-by-step guide for Solarman

2. Connect Alpha Innotec

Zerofy reaches alpha innotec heat pumps through the myUplink cloud, the same connector used for NIBE, with your myUplink login; Autopilot controls the hot-water boost.

1. Register the heat pump (Luxtronik 2.1, current software) in the myUplink app.
2. Make sure your myUplink account has the subscription needed for remote control.
3. In Zerofy, connect myUplink and log in with your myUplink credentials.
4. Enable Autopilot (Solar or Smart mode) for the hot-water tank.

Good to know: Only heat pumps on myUplink (Luxtronik 2.1) can be reached; Luxtronik 2.0 units that use heatpump24 can’t. Zerofy steers only the hot-water boost, not room or flow temperature.

3. Turn on Autopilot

In Zerofy, open your Alpha Innotec heat pump, turn on Autopilot and choose Solar – or Smart to also use dynamic tariffs and forecasts. Set the priority, activation threshold and minimum runtime.

Dynamic tariffs

Zerofy can also run your Alpha Innotec heat pump on dynamic electricity prices (EPEX Spot or Nord Pool, e.g. Tibber or aWATTar) or on a fixed time-of-use tariff. Smart mode combines those prices with forecasts of your household consumption and your Solarman solar production.

Learn more about Smart Mode

About Solarman and Alpha Innotec

Solarman – Solarman (IGEN Tech, Wuxi, China) does not make inverters: it makes data loggers such as the LSW-3 Wi-Fi stick and runs the SOLARMAN Smart platform, which according to IGEN works with about 200 inverter brands, including Deye. If your inverter’s app is SOLARMAN Smart, your data comes through Solarman whatever brand is on the inverter. Monitoring app: SOLARMAN Smart.

Alpha Innotec – alpha innotec is a German heat pump brand of ait-deutschland in Kasendorf, Bavaria. Its heat pumps run on the Luxtronik controller; units with Luxtronik 2.1 connect to the myUplink cloud, older Luxtronik 2.0 units use heatpump24. Products: Air-to-water and brine-to-water heat pumps with Luxtronik 2.1 control (myUplink) or Luxtronik 2.0 (heatpump24).

Manufacturer information last checked: October 2026.

All devices that work with Solarman