Deye + PHNIX

What Zerofy can do with Deye and PHNIX

In practice

• Autopilot isn’t available for PHNIX yet, so Zerofy won’t run your PHNIX heat pump on solar surplus automatically. You can see Deye production and PHNIX in one app and adjust the room temperature and flow temperature from there.
• Because Zerofy does not run PHNIX units on surplus automatically, put the heating or pool-heating window into the middle of the day with a schedule; pool heat pumps run mainly in summer, when midday PV output is highest.

What Deye and PHNIX offer on their own

Deye: Deye hybrids have no SG Ready output. A heating rod or other load can be wired to the GEN port in Smart Load Output mode, but it switches only by battery SOC (e.g. on at 100 %, off below 95 %), not by measured surplus.

PHNIX: PHNIX’s “PV Ready” function lets the heat pump adjust its compressor frequency to the available solar power, controlled by a home energy manager or, if there is none, by PHNIX’s own Smart Meter. A “Spot Time” mode works with grid prices (target temperature, maximum frequency, six daily timers), and the Heco series also has an SG Ready interface.

Zerofy connects the two: it reads Deye production and controls your PHNIX heat pump to match, together with your other devices in one app.

Setting up Deye and PHNIX in Zerofy

1. Connect Deye

Zerofy connects to Deye Cloud with your Deye Cloud login and reads PV production, meter (consumption) and battery data.

1. Register your system in Deye Cloud (web or the Deye Cloud app).
2. In Zerofy, add an inverter, choose Deye and log in with your Deye Cloud credentials.
3. Configure the meters: the grid meter as main meter (bi-directional or consumption), production as a sub meter of type production.

Step-by-step guide for Deye

2. Connect PHNIX

Zerofy connects to the PHNIX cloud with your PHNIX app login and shows the heat pump’s live status; you can set the room temperature and the water circulation temperature from Zerofy.

1. Connect the heat pump to the internet and register it in the PHNIX app.
2. In Zerofy, add PHNIX and log in with your PHNIX account credentials.

Good to know: Zerofy’s Autopilot does not yet run PHNIX heat pumps on solar surplus or dynamic prices; control from Zerofy is manual or by schedule.

Step-by-step guide for PHNIX

About Deye and PHNIX

Deye – Deye (Ningbo Deye Inverter Technology, Ningbo, China) is best known for low-voltage hybrid inverters such as the three-phase SUN-5K to SUN-12K-SG04LP3-EU, used with 48 V batteries. It also makes SUN-M60/80/100G4 microinverters (600–1000 W) for balcony and small rooftop systems. Monitoring app: Deye Cloud.

PHNIX – Guangdong PHNIX Eco-energy Solution Ltd. is a Chinese heat pump manufacturer based in Guangzhou (Nansha), founded in 2002. It makes air-to-water heat pumps for heating, cooling and hot water, hot-water heat pumps and swimming pool heat pumps, and exports about half its products, including to Europe. Products: Air-to-water heat pumps (Everest, Heco, GreenTherm Pro R290, HeatGreen), airExpert R290 all-in-one hot-water heat pump, full-inverter swimming pool heat pumps.

Manufacturer information last checked: October 2026.

All devices that work with Deye