Fronius + PHNIX

What Zerofy can do with Fronius and PHNIX

In practice

• Autopilot isn’t available for PHNIX yet, so Zerofy won’t run your PHNIX heat pump on solar surplus automatically. You can see Fronius production and PHNIX in one app and adjust the room temperature and flow temperature from there.
• Because Zerofy does not run PHNIX units on surplus automatically, put the heating or pool-heating window into the middle of the day with a schedule; pool heat pumps run mainly in summer, when midday PV output is highest.

What Fronius and PHNIX offer on their own

Fronius: The Fronius Ohmpilot feeds surplus into a heating rod (0.3–3 kW single-phase, 0.9–9 kW three-phase) and has a control output for a heat pump with an SG Ready input. GEN24 inverters can also switch an SG Ready input through one of their four digital outputs plus a coupling relay, and Fronius lists direct integrations with heat pumps from IDM, Bosch and NIBE.

PHNIX: PHNIX’s “PV Ready” function lets the heat pump adjust its compressor frequency to the available solar power, controlled by a home energy manager or, if there is none, by PHNIX’s own Smart Meter. A “Spot Time” mode works with grid prices (target temperature, maximum frequency, six daily timers), and the Heco series also has an SG Ready interface.

Zerofy connects the two: it reads Fronius production and controls your PHNIX heat pump to match, together with your other devices in one app.

Setting up Fronius and PHNIX in Zerofy

1. Connect Fronius

Zerofy reads your system from Fronius Solar.web through a guest account that you create for Zerofy.

1. Make sure your Fronius inverter is online and shows up in Solar.web.
2. In Solar.web, go to Settings → Permissions and create a new guest account.
3. Add Fronius in Zerofy and log in with the guest account credentials.

Step-by-step guide for Fronius

2. Connect PHNIX

Zerofy connects to the PHNIX cloud with your PHNIX app login and shows the heat pump’s live status; you can set the room temperature and the water circulation temperature from Zerofy.

1. Connect the heat pump to the internet and register it in the PHNIX app.
2. In Zerofy, add PHNIX and log in with your PHNIX account credentials.

Good to know: Zerofy’s Autopilot does not yet run PHNIX heat pumps on solar surplus or dynamic prices; control from Zerofy is manual or by schedule.

Step-by-step guide for PHNIX

About Fronius and PHNIX

Fronius – Austrian manufacturer of inverters, welding and battery-charging technology. Homeowners typically have a Primo GEN24 (single-phase, 3–6 kW) or Symo GEN24 (three-phase, 3–10 kW) hybrid inverter, older Primo/Symo SnapINverters, and the Fronius Reserva battery (6.3–15.8 kWh). Monitoring app: Fronius Solar.web.

PHNIX – Guangdong PHNIX Eco-energy Solution Ltd. is a Chinese heat pump manufacturer based in Guangzhou (Nansha), founded in 2002. It makes air-to-water heat pumps for heating, cooling and hot water, hot-water heat pumps and swimming pool heat pumps, and exports about half its products, including to Europe. Products: Air-to-water heat pumps (Everest, Heco, GreenTherm Pro R290, HeatGreen), airExpert R290 all-in-one hot-water heat pump, full-inverter swimming pool heat pumps.

Manufacturer information last checked: October 2026.

All devices that work with Fronius