Viessmann heat pumps
Air/water monoblocAir/water splitGround sourceHot water 9 series
Viessmann Climate Solutions, based in Allendorf (Eder), Germany, was founded in 1917 as a heating technology manufacturer and has been part of Carrier Global Corporation since January 2024. Its Vitocal heat pump range covers R290 monoblock air-to-water units (Vitocal 150-A, 250-A, 200-A ie), R32 split units (Vitocal 200-S, 222-S), brine and water-to-water units (Vitocal 222-G, 300-G, 350-G) and domestic hot water heat pumps (Vitocal 060-A, 262-A).
Checked November 2, 2026 · Allendorf (Eder), Germany, founded 1917 · Manufacturer website · Datasheet library
Photo: Viessmann
Grant lists
BAFA WEP (Germany)
7 / 9 checked November 4, 2026
ZUM (Poland)
6 / 9 checked November 4, 2026
Viessmann in Zerofy
BetaZerofy reads Viessmann heat pumps through the manufacturer's cloud (ViCare), with the account the heat pump is already registered with. Autopilot then moves heat into the building and the hot water tank when your own solar power is available or the electricity price is low.
What Zerofy can do with it:
Heating statusHot water statusHot water boostHot water temperatureRoom temperatureSolar AutopilotSmart Autopilot (tariff-optimised heating)
Viessmann heat pump types
Viessmann Air-to-water monoblock
The whole refrigerant circuit sits in one outdoor unit; only water pipes run into the house. The most common choice for retrofits, because no refrigerant lines need to be installed inside.
Air/water monoblocR290
Viessmann Vitocal 250-A
9 models
- Output
- 4–9 kW
- SCOP 35 °C
- 4.44–5.27
- Max. flow
- 70 °C
- BAFA WEP
- 159 models listed
- ZUM
- 76 models listed
- Zerofy
- Native
Air/water monoblocR290
Viessmann Vitocal 150-A
7 models
- Output
- 4–9.1 kW
- SCOP 35 °C
- 4.44–5.06
- Max. flow
- 70 °C
- BAFA WEP
- 84 models listed
- ZUM
- 36 models listed
- Zerofy
- Native
Air/water monoblocR290
Viessmann Vitocal 200-A / 200-A ie
4 models
- Output
- 4.9–10.3 kW
- SCOP 35 °C
- 4.14–5.26
- Max. flow
- 75 °C
- BAFA WEP
- 11 models listed
- ZUM
- 4 models listed
- Zerofy
- Native
Viessmann Air-to-water split
An outdoor unit plus an indoor hydraulic station, joined by refrigerant lines. The pipework inside the house stays frost-free without glycol, and the indoor part is often quieter to place.
Air/water splitR32
Viessmann Vitocal 200-S / 222-S
9 models
- Output
- 5.3–8.3 kW
- SCOP 35 °C
- 4.47–4.96
- Max. flow
- 60 °C
- BAFA WEP
- 38 models listed
- ZUM
- 35 models listed
- Zerofy
- Native
Viessmann Ground-source (brine/water)
Draws heat from a borehole or ground loop, so the source stays at a steady temperature all winter. Higher efficiency and no outdoor noise, but boreholes cost money and need a permit.
Ground sourceR290
Viessmann Vitocal 300-G ie
3 models
- Output
- 5.9–13.1 kW
- SCOP 35 °C
- 5.29–5.63
- Max. flow
- 70 °C
- BAFA WEP
- 6 models listed
- ZUM
- 3 models listed
- Zerofy
- Native
Ground sourceR410A
Viessmann Vitocal 222-G / 333-G
8 models
- Output
- 4.3–10.4 kW
- SCOP 35 °C
- 4.75–5.32
- Max. flow
- 65 °C
- BAFA WEP
- 6 models listed
- ZUM
- 10 models listed
- Zerofy
- Native
Ground sourceR410A
Viessmann Vitocal 350-G
5 models
- Output
- 20.5–42.3 kW
- SCOP 35 °C
- 6.14–6.58
- Max. flow
- 68 °C
- BAFA WEP
- 4 models listed
- ZUM
- No model on the list
- Zerofy
- Native
Viessmann Hot water heat pumps
A small heat pump built onto a hot water tank. It heats drinking water only and is a good way to turn surplus solar into stored heat – or to add hot water to a house that is otherwise heated differently.
Hot waterR290
Viessmann Vitocal 262-A
3 models
- Output
- –
- SCOP 35 °C
- –
- Max. flow
- 65 °C
- BAFA WEP
- Not confirmed
- ZUM
- Not confirmed
- Zerofy
- Native
Hot waterR290
Viessmann Vitocal 060-A
3 models
- Output
- –
- SCOP 35 °C
- –
- Max. flow
- 62 °C
- BAFA WEP
- Not confirmed
- ZUM
- Not confirmed
- Zerofy
- Native
Viessmann series at a glance
| Series | Type | Output | SCOP 35 °C | SCOP 55 °C | Refrigerant | Max. flow | BAFA WEP | ZUM | SG Ready | Modbus | EEBUS |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Vitocal 250-A | Air/water monobloc | 4–9 kW | 4.44–5.27 | 3.33–4.18 | R290 | 70 °C | 159 models listed | 76 models listed | Yes | –Not documented | –Not documented |
| Vitocal 150-A | Air/water monobloc | 4–9.1 kW | 4.44–5.06 | 3.25–3.98 | R290 | 70 °C | 84 models listed | 36 models listed | Yes | –Not documented | –Not documented |
| Vitocal 200-A / 200-A ie | Air/water monobloc | 4.9–10.3 kW* | 4.14–5.26 | 3.2–3.98 | R290 | 75 °C | 11 models listed | 4 models listed | Yes | Yes | –Not documented |
| Vitocal 200-S / 222-S | Air/water split | 5.3–8.3 kW | 4.47–4.96 | 3.2–3.43 | R32 | 60 °C | 38 models listed | 35 models listed | Yes | –Not documented | –Not documented |
| Vitocal 300-G ie | Ground source | 5.9–13.1 kW* | 5.29–5.63 | 3.73–4.18 | R290 | 70 °C | 6 models listed | 3 models listed | Yes | Yes | –Not documented |
| Vitocal 222-G / 333-G | Ground source | 4.3–10.4 kW | 4.75–5.32 | 3.7–3.98 | R410A | 65 °C | 6 models listed | 10 models listed | Yes | Yes | –Not documented |
| Vitocal 350-G | Ground source | 20.5–42.3 kW | 6.14–6.58 | 4.83–5.02 | R410A | 68 °C | 4 models listed | No model on the list | Yes | Yes | –Not documented |
| Vitocal 262-A | Hot water | – | – | – | R290 | 65 °C | Not confirmed | Not confirmed | ?Not confirmed | ?Not confirmed | ?Not confirmed |
| Vitocal 060-A | Hot water | – | – | – | R290 | 62 °C | Not confirmed | Not confirmed | ?Not confirmed | ?Not confirmed | ?Not confirmed |
Heating output is the figure in the manufacturer's datasheet; the basis (nominal output at A7/W35 or B0/W35, or design heat load) differs between brands, so check the datasheet before comparing. * = design heat load Pdesignh at 35 °C from the BAFA portal.
Sources
Specifications come from the manufacturer's datasheets linked above, grant status from the official lists below, checked November 2, 2026:
- elan1.bafa.bund.de/zvi-ui/wep/waermepumpen
- www.viessmann.de/de/wohngebaeude/waermepumpe.html
- www.viessmann-climatesolutions.com/de/ueber-uns.html
- developer.viessmann-climatesolutions.com/start.html
- community.viessmann.de/viessmann/attachments/viessmann/customers-heatpump-hybrid/97841/...
- BAFA Wärmeerzeuger-Portal – Wärmepumpen – checked November 4, 2026
- Lista ZUM (Instytut Ochrony Środowiska) – checked November 4, 2026
- EEBUS certified devices – checked November 2, 2026
SG Ready is a label of the Bundesverband Wärmepumpe (BWP) e.V.; “Yes” means the manufacturer documents the two-input interface or declares it on the BAFA portal, not that the series carries the BWP label – the label list is at waermepumpe.de. EEBUS is a standard of the EEBus Initiative e.V.; Modbus is a registered trademark of Schneider Electric, licensed to the Modbus Organization. Product names, logos and photos belong to their manufacturers and are shown to identify the products. Grant data: BAFA Wärmeerzeuger-Portal and Lista ZUM (IOŚ-PIB) as of the dates shown; the SCOP at 55 °C in the BAFA tables is calculated by Zerofy from the portal's ηs value.
Heat with your own solar power
Zerofy moves your heat pump's runtime into the hours with surplus solar power or low prices – automatically.
Get ZerofyOther heat pump brands
Compare all brands in the heat pump database.