Clivet heat pumps

Air/water monoblocAir/water splitHot water 5 series

Clivet is an Italian air-conditioning and heating manufacturer from Feltre in the Veneto, founded in 1989 and in an alliance with the Midea Group since 2016. Its residential heat pumps are the Edge family of air-to-water monoblocks (Edge Evo 2.0 EXC with R32, Edge F and Edge Pro with R290), the Sphera Evo 2.0 refrigerant-split unit with built-in hot water tank and the Aqua F hot water heat pump. Chillers, the Sheen / Thunder / Large light-commercial heat pumps and the split / VRF air conditioners are not part of this database. In Germany the units are listed under CLIVET GmbH.

Checked November 2, 2026 · Feltre (Belluno), Italy, founded 1989 · Manufacturer website · Datasheet library

Clivet Edge Evo 2.0 EXC

Photo: Clivet

Grant lists

BAFA WEP (Germany)

4 / 5 checked November 4, 2026

ZUM (Poland)

0 / 5 checked November 4, 2026

Clivet in Zerofy

Zerofy has no integration for Clivet yet. Where a series below has an SG Ready input, Zerofy can still switch it through a Shelly relay. The heat pump comparison lists every brand Zerofy supports.

Clivet heat pump types

Air-to-water monoblock3 Air-to-water split1 Hot water heat pumps1

Clivet Air-to-water monoblock

The whole refrigerant circuit sits in one outdoor unit; only water pipes run into the house. The most common choice for retrofits, because no refrigerant lines need to be installed inside.

Air/water monoblocR32

Clivet Edge Evo 2.0 EXC

14 models

Output
4.2–30.1 kW
SCOP 35 °C
4.2–5.22
Max. flow
65 °C
BAFA WEP
36 models listed
ZUM
No model on the list
Zerofy
Via SG Ready
Details and listed models

Air/water monoblocR290

Clivet Edge F

10 models

Output
4.5–15 kW
SCOP 35 °C
4.59–5.19
Max. flow
75 °C
BAFA WEP
26 models listed
ZUM
No model on the list
Zerofy
Via SG Ready
Details and listed models

Air/water monoblocR290

Clivet Edge Pro

12 models

Output
4.1–15.5 kW
SCOP 35 °C
4.72–5.35
Max. flow
80 °C
BAFA WEP
78 models listed
ZUM
No model on the list
Zerofy
Via SG Ready
Details and listed models

Clivet Air-to-water split

An outdoor unit plus an indoor hydraulic station, joined by refrigerant lines. The pipework inside the house stays frost-free without glycol, and the indoor part is often quieter to place.

Air/water splitR32

Clivet Sphera Evo 2.0

3 models

Output
4.3–16 kW
SCOP 35 °C
4.89–5.32
Max. flow
–
BAFA WEP
22 models listed
ZUM
No model on the list
Zerofy
Via SG Ready
Details and listed models

Clivet Hot water heat pumps

A small heat pump built onto a hot water tank. It heats drinking water only and is a good way to turn surplus solar into stored heat – or to add hot water to a house that is otherwise heated differently.

Hot waterR290

Clivet Aqua F

4 models

Output
1.2–1.5 kW
SCOP 35 °C
–
Max. flow
–
BAFA WEP
Not confirmed
ZUM
No model on the list
Zerofy
Via SG Ready
Details and listed models

Clivet series at a glance

Series Type Output SCOP 35 °C SCOP 55 °C Refrigerant Max. flow BAFA WEP ZUM SG Ready Modbus EEBUS
Edge Evo 2.0 EXC Air/water monobloc 4.2–30.1 kW 4.2–5.22 3.15–3.52 R32 65 °C 36 models listed No model on the list Yes Yes –Not documented
Edge F Air/water monobloc 4.5–15 kW 4.59–5.19 3.57–3.82 R290 75 °C 26 models listed No model on the list Yes Yes –Not documented
Edge Pro Air/water monobloc 4.1–15.5 kW 4.72–5.35 3.87–4.08 R290 80 °C 78 models listed No model on the list Yes Yes –Not documented
Sphera Evo 2.0 Air/water split 4.3–16 kW 4.89–5.32 3.33–3.73 R32 – 22 models listed No model on the list Yes ?Not confirmed ?Not confirmed
Aqua F Hot water 1.2–1.5 kW – – R290 – Not confirmed No model on the list Yes Yes –Not documented

Heating output is the figure in the manufacturer's datasheet; the basis (nominal output at A7/W35 or B0/W35, or design heat load) differs between brands, so check the datasheet before comparing. * = design heat load Pdesignh at 35 °C from the BAFA portal.

Sources

Specifications come from the manufacturer's datasheets linked above, grant status from the official lists below, checked November 2, 2026:

  1. www.clivet.com/en/about/the-history
  2. www.clivet.com/en/about/clivet-group
  3. www.clivet.com/en/products/home-solutions/heat-pump
  4. BAFA Wärmeerzeuger-Portal – Wärmepumpen – checked November 4, 2026
  5. Lista ZUM (Instytut Ochrony Środowiska) – checked November 4, 2026
  6. EEBUS certified devices – checked November 2, 2026

SG Ready is a label of the Bundesverband Wärmepumpe (BWP) e.V.; “Yes” means the manufacturer documents the two-input interface or declares it on the BAFA portal, not that the series carries the BWP label – the label list is at waermepumpe.de. EEBUS is a standard of the EEBus Initiative e.V.; Modbus is a registered trademark of Schneider Electric, licensed to the Modbus Organization. Product names, logos and photos belong to their manufacturers and are shown to identify the products. Grant data: BAFA Wärmeerzeuger-Portal and Lista ZUM (IOŚ-PIB) as of the dates shown; the SCOP at 55 °C in the BAFA tables is calculated by Zerofy from the portal's ηs value.

Heat with your own solar power

Zerofy moves your heat pump's runtime into the hours with surplus solar power or low prices – automatically.

Get Zerofy

Other heat pump brands

Aermec Aira Alpha Innotec Ariston Atlantic Austria Email AUX Baxi Beretta Bosch Buderus Carrier Cooper&Hunter CTA CTC Daikin De Dietrich Defro Fujitsu General Galmet Gree Haier Hargassner Heiztechnik Hewalex Hisense Hitachi HKS Lazar Ideal Heating iDM Energiesysteme Immergas Intergas Kaisai Kermi Kołton Kospel Kostrzewa LAMBDA Wärmepumpen LG Midea Mitsubishi Electric NIBE Novelan Ochsner OVUM Heiztechnik Panasonic PHNIX Qvantum Remeha Rotenso Samsung Sauter Sevra Sinclair Stiebel Eltron Tecalor Thermia Thermor Toshiba Vaillant Vasco Viessmann Weheat Weishaupt Wolf YORK

Compare all brands in the heat pump database.