Aermec heat pumps
Air/water monobloc 4 series
Aermec is an Italian HVAC manufacturer from Bevilacqua near Verona, founded in 1961 by Giordano Riello and the main company of the family-owned Giordano Riello International Group. Most of its output is commercial (chillers, large heat pumps, fan coils, air handling units); the residential air-to-water range is the R32 HMI family, sold as HMI, HMI_1 (4 to 16 kW, single or three phase) and the three-phase HMI T units for 18 to 30 kW. In Germany the heat pumps are listed under Aermec Deutschland GmbH.
Checked November 2, 2026 · Bevilacqua (Verona), Italy, founded 1961 · Manufacturer website · Datasheet library
Grant lists
BAFA WEP (Germany)
3 / 4 checked November 4, 2026
ZUM (Poland)
0 / 4 checked November 4, 2026
Aermec in Zerofy
Zerofy has no integration for Aermec yet. Where a series below has an SG Ready input, Zerofy can still switch it through a Shelly relay. The heat pump comparison lists every brand Zerofy supports.
Aermec heat pump types
Aermec Air-to-water monoblock
The whole refrigerant circuit sits in one outdoor unit; only water pipes run into the house. The most common choice for retrofits, because no refrigerant lines need to be installed inside.
Air/water monoblocR32
Aermec HMI_1
12 models
- Output
- 5–15.7 kW
- SCOP 35 °C
- 3.83
- Max. flow
- 65 °C
- BAFA WEP
- 2 models listed
- ZUM
- No model on the list
- Zerofy
- Via SG Ready
Air/water monoblocR32
Aermec HMI (HMI080 to HMI160)
9 models
- Output
- 7.5–15.5 kW
- SCOP 35 °C
- –
- Max. flow
- 60 °C
- BAFA WEP
- No model on the list
- ZUM
- No model on the list
- Zerofy
- Via SG Ready
Air/water monoblocR32
Aermec HMI 180T and 220T
2 models
- Output
- 18–22 kW
- SCOP 35 °C
- 3.25
- Max. flow
- 65 °C
- BAFA WEP
- 1 model listed
- ZUM
- No model on the list
- Zerofy
- Via SG Ready
Air/water monoblocR32
Aermec HMI 260T and 300T
2 models
- Output
- 26–30 kW
- SCOP 35 °C
- 3.25
- Max. flow
- 65 °C
- BAFA WEP
- 2 models listed
- ZUM
- No model on the list
- Zerofy
- Via SG Ready
Aermec series at a glance
| Series | Type | Output | SCOP 35 °C | SCOP 55 °C | Refrigerant | Max. flow | BAFA WEP | ZUM | SG Ready | Modbus | EEBUS |
|---|---|---|---|---|---|---|---|---|---|---|---|
| HMI_1 | Air/water monobloc | 5–15.7 kW | 3.83 | 3.45–3.88 | R32 | 65 °C | 2 models listed | No model on the list | Yes | Yes | –Not documented |
| HMI (HMI080 to HMI160) | Air/water monobloc | 7.5–15.5 kW | – | 3.2–3.28 | R32 | 60 °C | No model on the list | No model on the list | Yes | Yes | –Not documented |
| HMI 180T and 220T | Air/water monobloc | 18–22 kW | 3.25 | 3.25 | R32 | 65 °C | 1 model listed | No model on the list | Yes | Yes | –Not documented |
| HMI 260T and 300T | Air/water monobloc | 26–30 kW | 3.25 | 3.25 | R32 | 65 °C | 2 models listed | No model on the list | Yes | Yes | –Not documented |
Heating output is the figure in the manufacturer's datasheet; the basis (nominal output at A7/W35 or B0/W35, or design heat load) differs between brands, so check the datasheet before comparing. * = design heat load Pdesignh at 35 °C from the BAFA portal.
Sources
Specifications come from the manufacturer's datasheets linked above, grant status from the official lists below, checked November 2, 2026:
- global.aermec.com/en/company/
- www.aermec.com/download?id=23770
- www.aermec.com/download?id=22661
- www.aermec.com/download?id=23074
- www.aermec.com/download?id=23782
- BAFA Wärmeerzeuger-Portal – Wärmepumpen – checked November 4, 2026
- Lista ZUM (Instytut Ochrony Środowiska) – checked November 4, 2026
- EEBUS certified devices – checked November 2, 2026
SG Ready is a label of the Bundesverband Wärmepumpe (BWP) e.V.; “Yes” means the manufacturer documents the two-input interface or declares it on the BAFA portal, not that the series carries the BWP label – the label list is at waermepumpe.de. EEBUS is a standard of the EEBus Initiative e.V.; Modbus is a registered trademark of Schneider Electric, licensed to the Modbus Organization. Product names, logos and photos belong to their manufacturers and are shown to identify the products. Grant data: BAFA Wärmeerzeuger-Portal and Lista ZUM (IOŚ-PIB) as of the dates shown; the SCOP at 55 °C in the BAFA tables is calculated by Zerofy from the portal's ηs value.
Heat with your own solar power
Zerofy moves your heat pump's runtime into the hours with surplus solar power or low prices – automatically.
Get ZerofyOther heat pump brands
Compare all brands in the heat pump database.