Beretta heat pumps
Air/water monoblocAir/water splitHot water 8 series
Beretta is an Italian heating brand of Riello S.p.A. in Legnago, which Ariston Group has agreed to buy from Carrier; in Poland it is sold by RUG Riello Urządzenia Grzewcze S.A. in Toruń. The air-to-water range consists of the R32 monoblocks HYDRO UNIT M (4 to 16 kW and 18 to 30 kW), the R290 monoblock HYDRO UNIT P (Italy), the R32 split systems EXCLUSIVE AGILE (wall-hung indoor unit), TOWER GREEN M (floor-standing indoor unit with hot water tank) and AGILE IN-WALL BOX (recessed box, Italy), plus the ACQUAZENIT and HP-N ACS hot water heat pumps sold in Italy.
Checked November 4, 2026 · Legnago (Verona), Italy · Manufacturer website · Datasheet library
Photo: Beretta
Grant lists
BAFA WEP (Germany)
0 / 8 checked November 4, 2026
ZUM (Poland)
3 / 8 checked November 4, 2026
Beretta in Zerofy
Zerofy has no integration for Beretta yet. Where a series below has an SG Ready input, Zerofy can still switch it through a Shelly relay. The heat pump comparison lists every brand Zerofy supports.
Beretta heat pump types
Beretta Air-to-water monoblock
The whole refrigerant circuit sits in one outdoor unit; only water pipes run into the house. The most common choice for retrofits, because no refrigerant lines need to be installed inside.
Air/water monoblocR32
Beretta HYDRO UNIT M 004-016
10 models
- Output
- 4.2–15.9 kW
- SCOP 35 °C
- –
- Max. flow
- 65 °C
- BAFA WEP
- No model on the list
- ZUM
- 10 models listed
- Zerofy
- Via SG Ready
Air/water monoblocR32
Beretta HYDRO UNIT M 018T-030T
4 models
- Output
- 18–30.1 kW
- SCOP 35 °C
- –
- Max. flow
- 60 °C
- BAFA WEP
- No model on the list
- ZUM
- No model on the list
- Zerofy
- Via SG Ready
Air/water monoblocR290
Beretta HYDRO UNIT P
8 models
- Output
- 4–13.8 kW
- SCOP 35 °C
- –
- Max. flow
- 75 °C
- BAFA WEP
- No model on the list
- ZUM
- No model on the list
- Zerofy
- Not supported
Beretta Air-to-water split
An outdoor unit plus an indoor hydraulic station, joined by refrigerant lines. The pipework inside the house stays frost-free without glycol, and the indoor part is often quieter to place.
Air/water splitR32
Beretta EXCLUSIVE AGILE
17 models
- Output
- 4.3–16 kW
- SCOP 35 °C
- –
- Max. flow
- 65 °C
- BAFA WEP
- No model on the list
- ZUM
- 11 models listed
- Zerofy
- Via SG Ready
Air/water splitR32
Beretta TOWER GREEN M
11 models
- Output
- 4.3–16 kW
- SCOP 35 °C
- –
- Max. flow
- 65 °C
- BAFA WEP
- No model on the list
- ZUM
- 11 models listed
- Zerofy
- Not supported
Air/water splitR32
Beretta AGILE IN-WALL BOX
10 models
- Output
- 4.3–12.1 kW
- SCOP 35 °C
- –
- Max. flow
- –
- BAFA WEP
- No model on the list
- ZUM
- No model on the list
- Zerofy
- Not supported
Beretta Hot water heat pumps
A small heat pump built onto a hot water tank. It heats drinking water only and is a good way to turn surplus solar into stored heat – or to add hot water to a house that is otherwise heated differently.
Hot waterR134a
Beretta ACQUAZENIT
4 models
- Output
- –
- SCOP 35 °C
- –
- Max. flow
- 55 °C
- BAFA WEP
- No model on the list
- ZUM
- No model on the list
- Zerofy
- Not supported
Hot waterR1234ze
Beretta HP-N ACS
3 models
- Output
- –
- SCOP 35 °C
- –
- Max. flow
- 62 °C
- BAFA WEP
- No model on the list
- ZUM
- No model on the list
- Zerofy
- Not supported
Beretta series at a glance
| Series | Type | Output | SCOP 35 °C | SCOP 55 °C | Refrigerant | Max. flow | BAFA WEP | ZUM | SG Ready | Modbus | EEBUS |
|---|---|---|---|---|---|---|---|---|---|---|---|
| HYDRO UNIT M 004-016 | Air/water monobloc | 4.2–15.9 kW | – | – | R32 | 65 °C | No model on the list | 10 models listed | Yes | Yes | –Not documented |
| HYDRO UNIT M 018T-030T | Air/water monobloc | 18–30.1 kW | – | – | R32 | 60 °C | No model on the list | No model on the list | Yes | Yes | –Not documented |
| HYDRO UNIT P | Air/water monobloc | 4–13.8 kW | – | – | R290 | 75 °C | No model on the list | No model on the list | ?Not confirmed | ?Not confirmed | ?Not confirmed |
| EXCLUSIVE AGILE | Air/water split | 4.3–16 kW | – | – | R32 | 65 °C | No model on the list | 11 models listed | Yes | Yes | –Not documented |
| TOWER GREEN M | Air/water split | 4.3–16 kW | – | – | R32 | 65 °C | No model on the list | 11 models listed | ?Not confirmed | ?Not confirmed | ?Not confirmed |
| AGILE IN-WALL BOX | Air/water split | 4.3–12.1 kW | – | – | R32 | – | No model on the list | No model on the list | ?Not confirmed | ?Not confirmed | ?Not confirmed |
| ACQUAZENIT | Hot water | – | – | – | R134a | 55 °C | No model on the list | No model on the list | ?Not confirmed | ?Not confirmed | ?Not confirmed |
| HP-N ACS | Hot water | – | – | – | R1234ze | 62 °C | No model on the list | No model on the list | ?Not confirmed | ?Not confirmed | ?Not confirmed |
Heating output is the figure in the manufacturer's datasheet; the basis (nominal output at A7/W35 or B0/W35, or design heat load) differs between brands, so check the datasheet before comparing. * = design heat load Pdesignh at 35 °C from the BAFA portal.
Sources
Specifications come from the manufacturer's datasheets linked above, grant status from the official lists below, checked November 4, 2026:
- www.berettaclima.it/catalogo/refrigeratori-pompe-calore-aria-acqua
- www.berettaclima.it/catalogo/scaldabagni
- www.berettaclima.it/documentazione/catalogo-beretta-e-schede-novita/27023874-00-beretta...
- beretta.pl/kategoria-produktu/pompy-ciepla/
- beretta.pl/wp-content/uploads/2023/08/Beretta_Katalog-Produktow_09_2026.pdf
- beretta.pl/wp-content/uploads/2023/11/27023882_02_Beretta_HYDRO-UNIT-M-004-030_PL_Broch...
- beretta.pl/wp-content/uploads/2023/11/Hydro-Unit-M_27019705_komplet_do_druku.pdf
- beretta.pl/wp-content/uploads/2026/09/Installation-manual-Doc-0217034_2-Ber-IT-EN-PL-3-...
- beretta.pl/wp-content/uploads/2023/11/hu1.pdf
- beretta.pl/wp-content/uploads/2023/11/27024205_01_Beretta_EXCLUSIVE-AGILE_PL_brochure_0...
- beretta.pl/wp-content/uploads/2023/11/Exclusive-Agile-Instrukcja_komplet_pl.pdf
- beretta.pl/wp-content/uploads/2025/03/27023697_01_Beretta_TOWER-GREEN-M_PL_Brochure_05....
- www.aristongroup.com/en/news/ariston-group-acquires-riello
- elan1.bafa.bund.de/zvi-ui/wep/waermepumpen
- lista-zum.ios.edu.pl/
- BAFA Wärmeerzeuger-Portal – Wärmepumpen – checked November 4, 2026
- Lista ZUM (Instytut Ochrony Środowiska) – checked November 4, 2026
- EEBUS certified devices – checked November 2, 2026
SG Ready is a label of the Bundesverband Wärmepumpe (BWP) e.V.; “Yes” means the manufacturer documents the two-input interface or declares it on the BAFA portal, not that the series carries the BWP label – the label list is at waermepumpe.de. EEBUS is a standard of the EEBus Initiative e.V.; Modbus is a registered trademark of Schneider Electric, licensed to the Modbus Organization. Product names, logos and photos belong to their manufacturers and are shown to identify the products. Grant data: BAFA Wärmeerzeuger-Portal and Lista ZUM (IOŚ-PIB) as of the dates shown; the SCOP at 55 °C in the BAFA tables is calculated by Zerofy from the portal's ηs value.
Heat with your own solar power
Zerofy moves your heat pump's runtime into the hours with surplus solar power or low prices – automatically.
Get ZerofyOther heat pump brands
Compare all brands in the heat pump database.