Ideal Heating heat pumps
Air/water monoblocAir/water split 4 series
Ideal Heating (formerly Ideal Boilers) is a British heating manufacturer from Hull, founded in 1906 and best known for its Logic gas boilers. It has been part of the French Groupe Atlantic since 2015. The heat pump range is sold in the UK and covers the Logic Air (R32) and HP290 (R290) monoblocs and two split systems that Ideal sells under Atlantic's own names, Alfea Extensa A.I. R32 and Alfea Excellia A.I. Atlantic says it manufactures the Logic Air in Merville, France, and the Alfea units are the same series Atlantic sells in France and Poland. The hot water cylinders that go with them come from Gledhill, another Groupe Atlantic company.
Checked November 2, 2026 · Kingston upon Hull, United Kingdom, founded 1906 · Manufacturer website
Photo: Ideal Heating
Grant lists
BAFA WEP (Germany)
0 / 4 checked November 4, 2026
ZUM (Poland)
0 / 4 checked November 4, 2026
Ideal Heating in Zerofy
Zerofy has no integration for Ideal Heating yet. Where a series below has an SG Ready input, Zerofy can still switch it through a Shelly relay. The heat pump comparison lists every brand Zerofy supports.
Ideal Heating heat pump types
Ideal Heating Air-to-water monoblock
The whole refrigerant circuit sits in one outdoor unit; only water pipes run into the house. The most common choice for retrofits, because no refrigerant lines need to be installed inside.
Air/water monoblocR32
Ideal Heating Logic Air
4 models
- Output
- 4–10 kW
- SCOP 35 °C
- 4.96–5.19
- Max. flow
- 60 °C
- BAFA WEP
- No model on the list
- ZUM
- No model on the list
- Zerofy
- Not supported
Air/water monoblocR290
Ideal Heating HP290
6 models
- Output
- 4.5–15 kW
- SCOP 35 °C
- 4.59–5.07
- Max. flow
- 75 °C
- BAFA WEP
- No model on the list
- ZUM
- No model on the list
- Zerofy
- Not supported
Ideal Heating Air-to-water split
An outdoor unit plus an indoor hydraulic station, joined by refrigerant lines. The pipework inside the house stays frost-free without glycol, and the indoor part is often quieter to place.
Air/water splitR32
Ideal Heating Alfea Extensa A.I. R32
4 models
- Output
- 4.5–9.5 kW
- SCOP 35 °C
- 4.38–4.51
- Max. flow
- –
- BAFA WEP
- No model on the list
- ZUM
- No model on the list
- Zerofy
- Not supported
Air/water splitR410A
Ideal Heating Alfea Excellia A.I.
3 models
- Output
- 10.8–15.2 kW
- SCOP 35 °C
- 3.77–3.85
- Max. flow
- –
- BAFA WEP
- No model on the list
- ZUM
- No model on the list
- Zerofy
- Not supported
Ideal Heating series at a glance
| Series | Type | Output | SCOP 35 °C | SCOP 55 °C | Refrigerant | Max. flow | BAFA WEP | ZUM | SG Ready | Modbus | EEBUS |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Logic Air | Air/water monobloc | 4–10 kW | 4.96–5.19 | 3.48–3.73 | R32 | 60 °C | No model on the list | No model on the list | –Not documented | –Not documented | –Not documented |
| HP290 | Air/water monobloc | 4.5–15 kW | 4.59–5.07 | 3.57–3.82 | R290 | 75 °C | No model on the list | No model on the list | –Not documented | Yes | –Not documented |
| Alfea Extensa A.I. R32 | Air/water split | 4.5–9.5 kW | 4.38–4.51 | 2.92–3.28 | R32 | – | No model on the list | No model on the list | ?Not confirmed | ?Not confirmed | ?Not confirmed |
| Alfea Excellia A.I. | Air/water split | 10.8–15.2 kW | 3.77–3.85 | 2.87–3 | R410A | – | No model on the list | No model on the list | ?Not confirmed | ?Not confirmed | ?Not confirmed |
Heating output is the figure in the manufacturer's datasheet; the basis (nominal output at A7/W35 or B0/W35, or design heat load) differs between brands, so check the datasheet before comparing. * = design heat load Pdesignh at 35 °C from the BAFA portal.
Sources
Specifications come from the manufacturer's datasheets linked above, grant status from the official lists below, checked November 2, 2026:
- idealheating.com/products/heat-pumps
- idealheating.com/about-us
- idealheating.com/_gatsby/file/f05a9df1492d10263fcb4cc545aded23/IHD_230620_Heat_Pump_Ran...
- downloads.ctfassets.net/sj902orc9wh4/5FKUo6gPWUCyj0m4RfNKyg/6d1cae9b9da950027e2d3cbc9f5...
- idealheating.com/_gatsby/file/0a7f6f288d55f84dbf1cc08a3f9108e0/240080_A09_WEB.pdf
- www.groupe-atlantic.fr/en/the-group/brands/
- www.groupe-atlantic.fr/en/?p=5399
- BAFA Wärmeerzeuger-Portal – Wärmepumpen – checked November 4, 2026
- Lista ZUM (Instytut Ochrony Środowiska) – checked November 4, 2026
- EEBUS certified devices – checked November 2, 2026
SG Ready is a label of the Bundesverband Wärmepumpe (BWP) e.V.; “Yes” means the manufacturer documents the two-input interface or declares it on the BAFA portal, not that the series carries the BWP label – the label list is at waermepumpe.de. EEBUS is a standard of the EEBus Initiative e.V.; Modbus is a registered trademark of Schneider Electric, licensed to the Modbus Organization. Product names, logos and photos belong to their manufacturers and are shown to identify the products. Grant data: BAFA Wärmeerzeuger-Portal and Lista ZUM (IOŚ-PIB) as of the dates shown; the SCOP at 55 °C in the BAFA tables is calculated by Zerofy from the portal's ηs value.
Heat with your own solar power
Zerofy moves your heat pump's runtime into the hours with surplus solar power or low prices – automatically.
Get ZerofyOther heat pump brands
Compare all brands in the heat pump database.