SAJ + Easee

What Zerofy can do with SAJ and Easee

In practice

• Zerofy adjusts the charging current of your Easee charger but doesn’t switch phases. On a three-phase connection, solar charging needs at least about 4.1 kW of surplus (6 A × 3 × 230 V); on a single-phase connection about 1.4 kW.
• A typical SAJ home system (3–10 kW) needs a sunny midday to reach the 4.1 kW three-phase minimum. Wired single-phase, the charger starts from about 1.4 kW but charges at no more than about 3.7 kW.
• Zerofy gets new SAJ data every 5 minutes and adjusts accordingly. A minimum runtime and an activation threshold in Autopilot keep passing clouds from interrupting charging.
• Zerofy also shows your SAJ battery, so you can see whether surplus goes into the battery or into the car.
• If your car is connected to Zerofy too, turn on Autopilot for either the car or the charger, not both.
• Easee needs at least 6 A to start, which is about 1.4 kW on one phase and 4.1 kW on three. If the charger’s phase mode is set to automatic, Zerofy warns you and plans with the three-phase minimum until Easee reports single-phase charging; a fixed single-phase setting lets charging start from about 1.4 kW, but caps it at about 3.7 kW.

What SAJ and Easee offer on their own

SAJ: SAJ’s Caro wallbox (7 kW, 6–32 A, or 11 kW, 6–16 A) can charge from solar and supports OCPP 1.6J. The manual says PV charging needs an SAJ H2+B2, HS2, AS2 or HS3 storage system plus the eManager.

Easee: Easee’s own solar charging needs an Easee Equalizer on the site (the P1/HAN version reads the smart meter, Equalizer Amp measures with current sensors) and Easee as site operator. The Easee app then offers “Surplus only” and “Limited grid usage”; it does not read any inverter directly.

Zerofy connects the two: it reads SAJ production and controls your Easee charger to match, together with your other devices in one app, with dynamic tariffs and forecast-based Smart mode.

Setting up SAJ and Easee in Zerofy

1. Connect SAJ

Zerofy reads your plant from the SAJ cloud: you add Zerofy as a developer in the Elekeeper app and then enter your Plant ID in Zerofy.

1. In the Elekeeper app, tap ••• and open Plant Management.
2. Under Developer/Partner, paste the Developer ID shown in Zerofy and confirm access.
3. Copy your Plant ID from Plant Management and paste it into Zerofy.

Good to know: How fresh the data is depends on how often the SAJ cloud updates. For the battery, Zerofy supports forced charging but not switching the battery mode.

Step-by-step guide for SAJ

2. Connect Easee

Zerofy logs in to your Easee account and starts, stops and sets the charging current through the Easee cloud.

1. Make sure your Easee charger is online and added to your Easee account.
2. In Zerofy, add an Easee charger and log in with your Easee account.

Good to know: Data synchronisation depends on how often the Easee cloud updates, so live values in Zerofy can lag behind the charger.

Step-by-step guide for Easee

3. Turn on Autopilot

In Zerofy, open your Easee charger, turn on Autopilot and choose Solar – or Smart to also use dynamic tariffs and forecasts. Set the priority, activation threshold and minimum runtime.

Dynamic tariffs

Zerofy can also run your Easee charger on dynamic electricity prices (EPEX Spot or Nord Pool, e.g. Tibber or aWATTar) or on a fixed time-of-use tariff. Smart mode combines those prices with forecasts of your household consumption and your SAJ solar production.

Learn more about Smart Mode

About SAJ and Easee

SAJ – SAJ (Guangzhou Sanjing Electric) is an inverter maker from Guangzhou, China. Homes usually have the H2 hybrid inverter with B2 battery or the HS2, HS3 or AS2 all-in-one storage systems; the eManager unit and the Caro wallbox tie them together. Monitoring app: Elekeeper.

Easee – Easee is a Norwegian charger maker. Its current EU model Charge Max is a compact 22 kW box with built-in LTE and a MID meter that also runs on 3×230 V IT grids; the predecessor Charge Up leaves the EU market at the end of 2026. Products: Charge Max, Charge Up, Charge Lite, Charge, Home, One.

Manufacturer information last checked: October 2026.

All devices that work with SAJ