Huawei + Huawei SCharger

What Zerofy can do with Huawei and Huawei SCharger

In practice

• Zerofy adjusts the charging current of your Huawei SCharger but doesn’t switch phases. On a three-phase connection, solar charging needs at least about 4.1 kW of surplus (6 A × 3 × 230 V); on a single-phase connection about 1.4 kW.
• A typical Huawei home system (2–10 kW) needs a sunny midday to reach the 4.1 kW three-phase minimum. Wired single-phase, the charger starts from about 1.4 kW but charges at no more than about 3.7 kW.
• Zerofy gets new Huawei data every 5 minutes and adjusts accordingly. A minimum runtime and an activation threshold in Autopilot keep passing clouds from interrupting charging.
• Zerofy also shows your Huawei battery, so you can see whether surplus goes into the battery or into the car.
• If your car is connected to Zerofy too, turn on Autopilot for either the car or the charger, not both.
• In Huawei’s own mode, the 22KT charges three-phase from about 4.14 kW and drops to single-phase below that if “Switch Between Single and Three Phases” is on; it then charges on L1 only, so Huawei advises wiring L1 to the least-loaded phase. Via OCPP, Zerofy sets the power but not the phases, so the minimum is 6 A: about 1.4 kW single-phase or 4.1 kW three-phase.

What Huawei and Huawei SCharger offer on their own

Huawei: Huawei’s own SCharger (7 kW single-phase / 22 kW three-phase) has a “PV preferred” mode in FusionSolar and can switch down to one phase for charging from about 1.4 kW. Surplus charging needs a Huawei inverter with SDongle (Modbus TCP enabled) and power meter, or the SmartAssistant (formerly EMMA) energy manager, which also handles one third-party charger such as Keba KeContact P30 or Mennekes AMTRON.

Huawei SCharger: Huawei’s own surplus mode is “PV Power Preferred” in FusionSolar. It needs a Huawei SUN2000 inverter and a Huawei Smart Power Sensor at the grid connection (DTSU666-FE directly, or an RS485 meter such as DTSU666-H relayed by the WLAN/FE Smart Dongle) and does not work in charger-only setups.

Directly, without Zerofy: The SCharger charges on surplus in the FusionSolar “PV preferred” mode; it needs a Huawei inverter with SDongle and power meter, or the SmartAssistant (EMMA).

Zerofy is the alternative if you want Huawei, Huawei SCharger and your other devices in one app, with dynamic tariffs and forecast-based Smart mode.

Setting up Huawei and Huawei SCharger in Zerofy

1. Connect Huawei

Zerofy connects to Huawei FusionSolar with the login of a FusionSolar owner account; the older Northbound API account still works as a legacy option.

1. Check that your FusionSolar account has a verified email address (System → Personal Settings).
2. Make sure it is an Owner account; if you only have an installer or company account, invite a new user with the role Owner in the FusionSolar app.
3. Add Huawei FusionSolar in Zerofy, choose the FusionSolar login and enter the owner account’s credentials.

Good to know: Installer and company accounts don’t work, and the owner invitation can only be sent from the FusionSolar smartphone app, not the web portal. If you use the legacy Northbound API, create a dedicated account for Zerofy, because sharing it with other services can cause data gaps.

Step-by-step guide for Huawei

2. Connect Huawei SCharger

The SCharger connects to Zerofy via OCPP, which is set in installer mode of the Huawei Fusion app; Zerofy can then start, stop and set the charging power.

1. Update the charger to FusionCharge V100R023C10SPC220 or later (OTA via the app).
2. In Zerofy, add a Huawei SCharger and copy the OCPP link (ocppconnect.net/<id>).
3. In the Fusion app, connect to the charger’s Wi-Fi, log in with Installer Mode and open OCPP.
4. Choose “Insecure transmission with basic authentication” and enter domain ocppconnect.net, port 80, path and username <id>, and any password.

Good to know: OCPP can only be set in installer mode, so many owners need their installer for the one-time setup. Older firmware must be updated first.

Step-by-step guide for Huawei SCharger

3. Turn on Autopilot

In Zerofy, open your Huawei SCharger, turn on Autopilot and choose Solar – or Smart to also use dynamic tariffs and forecasts. Set the priority, activation threshold and minimum runtime.

Dynamic tariffs

Zerofy can also run your Huawei SCharger on dynamic electricity prices (EPEX Spot or Nord Pool, e.g. Tibber or aWATTar) or on a fixed time-of-use tariff. Smart mode combines those prices with forecasts of your household consumption and your Huawei solar production.

Learn more about Smart Mode

About Huawei and Huawei SCharger

Huawei – Chinese manufacturer (Huawei Digital Power, Shenzhen). Homes typically have a SUN2000 hybrid inverter, either the single-phase L1 (2–6 kW) or the three-phase M1 (3–10 kW), with a LUNA2000 battery, plus optional optimizers and the SmartGuard backup box. Monitoring app: Huawei FusionSolar.

Huawei SCharger – The SCharger is the wallbox of the Chinese inverter maker Huawei (7.4 kW single-phase or 22 kW three-phase), the natural choice for homes with a Huawei inverter. It is sold through solar installers and is set up and monitored in FusionSolar. Products: SCharger-7KS-S0, SCharger-22KT-S0.

Manufacturer information last checked: October 2026.

All devices that work with Huawei