TSUN + Huawei SCharger

What Zerofy can do with TSUN and Huawei SCharger

In practice

• Zerofy adjusts the charging current of your Huawei SCharger but doesn’t switch phases. On a three-phase connection, solar charging needs at least about 4.1 kW of surplus (6 A × 3 × 230 V); on a single-phase connection about 1.4 kW.
• Many TSUN systems are small (typically 0.8–3 kW). A balcony system rarely produces the 1.4 kW needed to start charging, so solar charging works best with larger TSUN installations; Smart mode can still move charging to the cheapest hours.
• Zerofy gets new TSUN data every 5 minutes and adjusts accordingly. A minimum runtime and an activation threshold in Autopilot keep passing clouds from interrupting charging.
• If your car is connected to Zerofy too, turn on Autopilot for either the car or the charger, not both.
• In Huawei’s own mode, the 22KT charges three-phase from about 4.14 kW and drops to single-phase below that if “Switch Between Single and Three Phases” is on; it then charges on L1 only, so Huawei advises wiring L1 to the least-loaded phase. Via OCPP, Zerofy sets the power but not the phases, so the minimum is 6 A: about 1.4 kW single-phase or 4.1 kW three-phase.

What TSUN and Huawei SCharger offer on their own

TSUN: TSUN offers no EV charger and no surplus-charging function. An 800 W balcony system also stays below the about 1.4 kW a charger needs at its 6 A minimum.

Huawei SCharger: Huawei’s own surplus mode is “PV Power Preferred” in FusionSolar. It needs a Huawei SUN2000 inverter and a Huawei Smart Power Sensor at the grid connection (DTSU666-FE directly, or an RS485 meter such as DTSU666-H relayed by the WLAN/FE Smart Dongle) and does not work in charger-only setups.

Zerofy connects the two: it reads TSUN production and controls your Huawei SCharger to match, together with your other devices in one app, with dynamic tariffs and forecast-based Smart mode.

Setting up TSUN and Huawei SCharger in Zerofy

1. Connect TSUN

Zerofy connects to the TSUN cloud with your TSUN Smart login and reads your inverter data.

1. Register your system in the TSUN Smart app.
2. In Zerofy, add an inverter, choose TSUN and log in with your TSUN Smart credentials.

Good to know: Only TSUN Smart accounts work (inverter IDs starting with Y); TSUN Home accounts are not supported. Battery and meter data are only partly available, depending on the system.

Step-by-step guide for TSUN

2. Connect Huawei SCharger

The SCharger connects to Zerofy via OCPP, which is set in installer mode of the Huawei Fusion app; Zerofy can then start, stop and set the charging power.

1. Update the charger to FusionCharge V100R023C10SPC220 or later (OTA via the app).
2. In Zerofy, add a Huawei SCharger and copy the OCPP link (ocppconnect.net/<id>).
3. In the Fusion app, connect to the charger’s Wi-Fi, log in with Installer Mode and open OCPP.
4. Choose “Insecure transmission with basic authentication” and enter domain ocppconnect.net, port 80, path and username <id>, and any password.

Good to know: OCPP can only be set in installer mode, so many owners need their installer for the one-time setup. Older firmware must be updated first.

Step-by-step guide for Huawei SCharger

3. Turn on Autopilot

In Zerofy, open your Huawei SCharger, turn on Autopilot and choose Solar – or Smart to also use dynamic tariffs and forecasts. Set the priority, activation threshold and minimum runtime.

Dynamic tariffs

Zerofy can also run your Huawei SCharger on dynamic electricity prices (EPEX Spot or Nord Pool, e.g. Tibber or aWATTar) or on a fixed time-of-use tariff. Smart mode combines those prices with forecasts of your household consumption and your TSUN solar production.

Learn more about Smart Mode

About TSUN and Huawei SCharger

TSUN – TSUN (TSUNESS Co., Ltd., Suzhou, China, with a German office in Frankfurt) makes microinverters from 300 W single units to 3.3 kW 6-in-1 units. In Europe it is mainly found in 800 W balcony systems such as the TSOL-MS800, often combined with TSUN balcony storage (MSU2000, MSU4000Elite). Monitoring app: TSUN Smart.

Huawei SCharger – The SCharger is the wallbox of the Chinese inverter maker Huawei (7.4 kW single-phase or 22 kW three-phase), the natural choice for homes with a Huawei inverter. It is sold through solar installers and is set up and monitored in FusionSolar. Products: SCharger-7KS-S0, SCharger-22KT-S0.

Manufacturer information last checked: October 2026.

All devices that work with TSUN