Huawei + go-e

What Zerofy can do with Huawei and go-e

In practice

• Zerofy can switch your go-e Charger between one and three phases. Solar charging can therefore start at about 1.4 kW of surplus (6 A on one phase) and move to three phases once the surplus passes about 4.1 kW.
• A typical Huawei home system (2–10 kW) reaches the 1.4 kW single-phase minimum on most bright days; three-phase charging from about 4.1 kW needs a sunny midday or a larger system.
• Zerofy gets new Huawei data every 5 minutes and adjusts accordingly. A minimum runtime and an activation threshold in Autopilot keep passing clouds from interrupting charging.
• Zerofy also shows your Huawei battery, so you can see whether surplus goes into the battery or into the car.
• If your car is connected to Zerofy too, turn on Autopilot for either the car or the charger, not both.
• The go-eCharger charges from 6 A, about 1.4 kW on one phase and 4.1 kW on three. Zerofy charges single-phase up to about 3.7 kW of surplus and switches to three phases above that; go-e lists automatic phase switching for Gemini models and HOME V3, so older HOME units stay on the phases they are wired with.

What Huawei and go-e offer on their own

Huawei: Huawei’s own SCharger (7 kW single-phase / 22 kW three-phase) has a “PV preferred” mode in FusionSolar and can switch down to one phase for charging from about 1.4 kW. Surplus charging needs a Huawei inverter with SDongle (Modbus TCP enabled) and power meter, or the SmartAssistant (formerly EMMA) energy manager, which also handles one third-party charger such as Keba KeContact P30 or Mennekes AMTRON.

go-e: go-e’s own route to surplus charging is the go-e Controller, which measures the house connection with six current sensors and works with any inverter brand, including automatic 1/3-phase switching. Without the Controller, go-e relies on external energy managers through its open API, Modbus TCP or OCPP.

Zerofy connects the two: it reads Huawei production and controls your go-e Charger to match, together with your other devices in one app, with dynamic tariffs and forecast-based Smart mode.

Setting up Huawei and go-e in Zerofy

1. Connect Huawei

Zerofy connects to Huawei FusionSolar with the login of a FusionSolar owner account; the older Northbound API account still works as a legacy option.

1. Check that your FusionSolar account has a verified email address (System → Personal Settings).
2. Make sure it is an Owner account; if you only have an installer or company account, invite a new user with the role Owner in the FusionSolar app.
3. Add Huawei FusionSolar in Zerofy, choose the FusionSolar login and enter the owner account’s credentials.

Good to know: Installer and company accounts don’t work, and the owner invitation can only be sent from the FusionSolar smartphone app, not the web portal. If you use the legacy Northbound API, create a dedicated account for Zerofy, because sharing it with other services can cause data gaps.

Step-by-step guide for Huawei

2. Connect go-e

Zerofy uses the go-e Cloud HTTP API with your charger’s serial number and API token, sets the charging current and switches between one and three phases.

1. Update the charger to firmware 052 or later and the go-e app to 2.3 or later.
2. In the go-e app, go to Internet → Advanced Settings and turn on the Cloud HTTP API.
3. Copy the API token shown there and enter it in Zerofy together with the charger’s serial number.

Good to know: Supported are Gemini 2.0 (serial 400000+), Gemini (200000–399999) and HOME (050000–199999).

Step-by-step guide for go-e

3. Turn on Autopilot

In Zerofy, open your go-e Charger, turn on Autopilot and choose Solar – or Smart to also use dynamic tariffs and forecasts. Set the priority, activation threshold and minimum runtime.

Dynamic tariffs

Zerofy can also run your go-e Charger on dynamic electricity prices (EPEX Spot or Nord Pool, e.g. Tibber or aWATTar) or on a fixed time-of-use tariff. Smart mode combines those prices with forecasts of your household consumption and your Huawei solar production.

Learn more about Smart Mode

About Huawei and go-e

Huawei – Chinese manufacturer (Huawei Digital Power, Shenzhen). Homes typically have a SUN2000 hybrid inverter, either the single-phase L1 (2–6 kW) or the three-phase M1 (3–10 kW), with a LUNA2000 battery, plus optional optimizers and the SmartGuard backup box. Monitoring app: Huawei FusionSolar.

go-e – go-e is an Austrian charger maker. The current go-eCharger Gemini 2.0 (11 or 22 kW) has documented local and cloud APIs, MQTT, Modbus TCP, a freely configurable OCPP backend and an eSIM; according to the data sheet it is not approved for the Netherlands, France or Italy. Products: go-eCharger Gemini 2.0, Gemini, HOME.

Manufacturer information last checked: October 2026.

All devices that work with Huawei