Sungrow + Wallbox

What Zerofy can do with Sungrow and Wallbox

In practice

• Phase switching for Wallbox is coming to Zerofy. Until then the charger uses the phases it’s wired with, so on a three-phase connection solar charging needs at least about 4.1 kW of surplus (6 A × 3 × 230 V).
• A typical Sungrow home system (3–10 kW) needs a sunny midday to reach the 4.1 kW three-phase minimum. Wired single-phase, the charger starts from about 1.4 kW but charges at no more than about 3.7 kW.
• Zerofy gets new Sungrow data every 5 minutes and adjusts accordingly. A minimum runtime and an activation threshold in Autopilot keep passing clouds from interrupting charging.
• Zerofy also shows your Sungrow battery, so you can see whether surplus goes into the battery or into the car.
• If your car is connected to Zerofy too, turn on Autopilot for either the car or the charger, not both.
• Wallbox’s Full green mode needs 6 A of surplus, about 1.4 kW single-phase or 3×6 A (about 4.1 kW) three-phase, and Wallbox asks for the inverter to be set to export mode. The Wallbox solar mode measures with its own meter, but Zerofy does not need it: Autopilot works out the surplus from the inverter you have connected.

What Sungrow and Wallbox offer on their own

Sungrow: Sungrow sells its own AC chargers (AC007E-01, AC011E-01, AC22E-01), whose Eco mode charges on surplus when the charger is paired with a Sungrow hybrid inverter via WiNet. Larger setups with up to three chargers need the Sungrow iHomeManager; third-party wallboxes are not controlled by iSolarCloud itself.

Wallbox: Wallbox’s own Solar Charging (formerly Eco-Smart) needs a power meter sold by Wallbox at the grid connection and offers “Eco” (solar plus grid) and “Full green” (surplus only). With the meter, Pulsar Max and Pulsar Pro can drop from three to one phase when surplus is low (“3P Optimization”; tethered Pulsar Max units from August 2025 production); no inverter brand is read directly.

Zerofy connects the two: it reads Sungrow production and controls your Wallbox charger to match, together with your other devices in one app, with dynamic tariffs and forecast-based Smart mode.

Setting up Sungrow and Wallbox in Zerofy

1. Connect Sungrow

Zerofy connects to your Sungrow system through the iSolarCloud cloud, using your iSolarCloud login.

1. Make sure your Sungrow inverter is online and registered in iSolarCloud.
2. Add Sungrow in Zerofy and log in with your iSolarCloud credentials.

Step-by-step guide for Sungrow

2. Connect Wallbox

Wallbox chargers connect to Zerofy via OCPP 1.6J, which you switch on in the myWallbox app; Zerofy shows you the exact server and charge point identity to enter.

1. In Zerofy, add a Wallbox charger and copy the Server and Charge point identity.
2. In the myWallbox app, open the charger settings, go to External Management → OCPP and turn OCPP on.
3. Choose OCPP provider “Other”, paste both values, leave the password empty and save; the charger reboots and connects within 1–3 minutes.

Good to know: The charge point identity is case-sensitive, so use the copy buttons. While OCPP is active, charging is controlled from Zerofy instead of the myWallbox app; firmware updates, restarts and network settings stay in the myWallbox app.

Step-by-step guide for Wallbox

3. Turn on Autopilot

In Zerofy, open your Wallbox charger, turn on Autopilot and choose Solar – or Smart to also use dynamic tariffs and forecasts. Set the priority, activation threshold and minimum runtime.

Dynamic tariffs

Zerofy can also run your Wallbox charger on dynamic electricity prices (EPEX Spot or Nord Pool, e.g. Tibber or aWATTar) or on a fixed time-of-use tariff. Smart mode combines those prices with forecasts of your household consumption and your Sungrow solar production.

Learn more about Smart Mode

About Sungrow and Wallbox

Sungrow – Chinese inverter and storage maker based in Hefei. Homes typically have an SH-RS single-phase hybrid inverter (3–6 kW) or an SH-RT three-phase hybrid inverter (5–10 kW) with the SBR battery (6.4–25.6 kWh, 3.2 kWh modules), connected to the cloud through a WiNet-S/S2 dongle. Monitoring app: Sungrow iSolarCloud.

Wallbox – Wallbox is a Spanish charger maker whose small Pulsar series is one of Europe’s most widely sold wallboxes, as a tethered or socket version. In Germany, Austria and Switzerland it is also sold as ABL Pulsar. Products: Pulsar Plus, Pulsar Max, Pulsar Pro, Commander 2, Copper SB.

Manufacturer information last checked: October 2026.

All devices that work with Sungrow