Sungrow + go-e

What Zerofy can do with Sungrow and go-e

In practice

• Zerofy can switch your go-e Charger between one and three phases. Solar charging can therefore start at about 1.4 kW of surplus (6 A on one phase) and move to three phases once the surplus passes about 4.1 kW.
• A typical Sungrow home system (3–10 kW) reaches the 1.4 kW single-phase minimum on most bright days; three-phase charging from about 4.1 kW needs a sunny midday or a larger system.
• Zerofy gets new Sungrow data every 5 minutes and adjusts accordingly. A minimum runtime and an activation threshold in Autopilot keep passing clouds from interrupting charging.
• Zerofy also shows your Sungrow battery, so you can see whether surplus goes into the battery or into the car.
• If your car is connected to Zerofy too, turn on Autopilot for either the car or the charger, not both.
• The go-eCharger charges from 6 A, about 1.4 kW on one phase and 4.1 kW on three. Zerofy charges single-phase up to about 3.7 kW of surplus and switches to three phases above that; go-e lists automatic phase switching for Gemini models and HOME V3, so older HOME units stay on the phases they are wired with.

What Sungrow and go-e offer on their own

Sungrow: Sungrow sells its own AC chargers (AC007E-01, AC011E-01, AC22E-01), whose Eco mode charges on surplus when the charger is paired with a Sungrow hybrid inverter via WiNet. Larger setups with up to three chargers need the Sungrow iHomeManager; third-party wallboxes are not controlled by iSolarCloud itself.

go-e: go-e’s own route to surplus charging is the go-e Controller, which measures the house connection with six current sensors and works with any inverter brand, including automatic 1/3-phase switching. Without the Controller, go-e relies on external energy managers through its open API, Modbus TCP or OCPP.

Zerofy connects the two: it reads Sungrow production and controls your go-e Charger to match, together with your other devices in one app, with dynamic tariffs and forecast-based Smart mode.

Setting up Sungrow and go-e in Zerofy

1. Connect Sungrow

Zerofy connects to your Sungrow system through the iSolarCloud cloud, using your iSolarCloud login.

1. Make sure your Sungrow inverter is online and registered in iSolarCloud.
2. Add Sungrow in Zerofy and log in with your iSolarCloud credentials.

Step-by-step guide for Sungrow

2. Connect go-e

Zerofy uses the go-e Cloud HTTP API with your charger’s serial number and API token, sets the charging current and switches between one and three phases.

1. Update the charger to firmware 052 or later and the go-e app to 2.3 or later.
2. In the go-e app, go to Internet → Advanced Settings and turn on the Cloud HTTP API.
3. Copy the API token shown there and enter it in Zerofy together with the charger’s serial number.

Good to know: Supported are Gemini 2.0 (serial 400000+), Gemini (200000–399999) and HOME (050000–199999).

Step-by-step guide for go-e

3. Turn on Autopilot

In Zerofy, open your go-e Charger, turn on Autopilot and choose Solar – or Smart to also use dynamic tariffs and forecasts. Set the priority, activation threshold and minimum runtime.

Dynamic tariffs

Zerofy can also run your go-e Charger on dynamic electricity prices (EPEX Spot or Nord Pool, e.g. Tibber or aWATTar) or on a fixed time-of-use tariff. Smart mode combines those prices with forecasts of your household consumption and your Sungrow solar production.

Learn more about Smart Mode

About Sungrow and go-e

Sungrow – Chinese inverter and storage maker based in Hefei. Homes typically have an SH-RS single-phase hybrid inverter (3–6 kW) or an SH-RT three-phase hybrid inverter (5–10 kW) with the SBR battery (6.4–25.6 kWh, 3.2 kWh modules), connected to the cloud through a WiNet-S/S2 dongle. Monitoring app: Sungrow iSolarCloud.

go-e – go-e is an Austrian charger maker. The current go-eCharger Gemini 2.0 (11 or 22 kW) has documented local and cloud APIs, MQTT, Modbus TCP, a freely configurable OCPP backend and an eSIM; according to the data sheet it is not approved for the Netherlands, France or Italy. Products: go-eCharger Gemini 2.0, Gemini, HOME.

Manufacturer information last checked: October 2026.

All devices that work with Sungrow