SolarEdge + Fronius Wattpilot

What Zerofy can do with SolarEdge and Fronius Wattpilot

In practice

• Zerofy adjusts the charging current of your Wattpilot but doesn’t switch phases. On a three-phase connection, solar charging needs at least about 4.1 kW of surplus (6 A × 3 × 230 V); on a single-phase connection about 1.4 kW.
• A typical SolarEdge home system (3–10 kW) needs a sunny midday to reach the 4.1 kW three-phase minimum. Wired single-phase, the charger starts from about 1.4 kW but charges at no more than about 3.7 kW.
• Zerofy gets new SolarEdge data every 5 minutes and adjusts accordingly. A minimum runtime and an activation threshold in Autopilot keep passing clouds from interrupting charging.
• Zerofy also shows your SolarEdge battery, so you can see whether surplus goes into the battery or into the car.
• If your car is connected to Zerofy too, turn on Autopilot for either the car or the charger, not both.
• In its own surplus mode the Wattpilot starts at 1.38 kW on one phase, adjusts in 0.23 kW steps and switches to three phases above 4.14 kW, where it steps in 0.69 kW; the switching level can be changed in the app. Via OCPP, Zerofy sets the charging power but not the phases, so the minimum is 6 A: about 1.4 kW single-phase or 4.1 kW three-phase.

What SolarEdge and Fronius Wattpilot offer on their own

SolarEdge: SolarEdge sells its own EV charger, controlled from the mySolarEdge app. With the SolarEdge ONE Controller (inverter firmware 4.22 or later), mySolarEdge can instead run one third-party OCPP 1.6J charger with Excess Solar charging: MENNEKES AMTRON, Wallbox Pulsar Max/Plus/Pro, Alfen Eve S-line/Pro-line or ABB Terra AC. Only one charger can be used at a time.

Fronius Wattpilot: The Wattpilot’s own PV surplus charging needs a Fronius inverter (GEN24, Verto, or SnapINverter/IG with Datamanager 2.0) with a Fronius Smart Meter at the feed-in point, talking over the Solar API in the same network. Other inverter brands only work with an extra Fronius Smart Meter IP or Datamanager Box 2.0 plus Smart Meter; the Wattpilot then also appears in Fronius Solar.web.

Zerofy connects the two: it reads SolarEdge production and controls your Wattpilot to match, together with your other devices in one app, with dynamic tariffs and forecast-based Smart mode.

Setting up SolarEdge and Fronius Wattpilot in Zerofy

1. Connect SolarEdge

Zerofy connects to SolarEdge’s monitoring cloud with the same login you use for the SolarEdge Monitoring website or the mySolarEdge app.

1. Make sure your SolarEdge inverter is online and your account has the Owner role on the site.
2. Add a new SolarEdge device in Zerofy.
3. Log in with your SolarEdge Monitoring / mySolarEdge credentials and follow the on-screen prompts.

Good to know: Your account needs the Owner role, which the installer usually assigns to the system owner during setup; ask your installer if you don’t have it. Battery and meter data depend on how your system is configured.

Step-by-step guide for SolarEdge

2. Connect Fronius Wattpilot

The Wattpilot connects to Zerofy via OCPP 1.6J; you enter the connection details from Zerofy in the Solar.wattpilot app.

1. In Zerofy, add a Fronius Wattpilot and copy the OCPP connection details.
2. In the Solar.wattpilot app, go to Internet → OCPP and enter the details.
3. Save and wait until the status shows the connection is established.

Step-by-step guide for Fronius Wattpilot

3. Turn on Autopilot

In Zerofy, open your Wattpilot, turn on Autopilot and choose Solar – or Smart to also use dynamic tariffs and forecasts. Set the priority, activation threshold and minimum runtime.

Dynamic tariffs

Zerofy can also run your Wattpilot on dynamic electricity prices (EPEX Spot or Nord Pool, e.g. Tibber or aWATTar) or on a fixed time-of-use tariff. Smart mode combines those prices with forecasts of your household consumption and your SolarEdge solar production.

Learn more about Smart Mode

About SolarEdge and Fronius Wattpilot

SolarEdge – Israeli company (Herzliya) known for inverters with a power optimizer on every module. Homes typically have a SolarEdge Home Wave single-phase or Home Hub three-phase inverter with optimizers, often with a SolarEdge Home Battery and SolarEdge Home smart-energy accessories. Monitoring app: SolarEdge Monitoring / mySolarEdge app.

Fronius Wattpilot – The Wattpilot is the EV charger of the Austrian inverter maker Fronius, built for solar charging with automatic 1/3-phase switching and surplus charging from 1.4 kW. The Flex has LAN and Wi-Fi, a §14a input and a Pro version with MID and Eichrecht; it is mainly sold through installers. Products: Fronius Wattpilot Flex Home, Wattpilot Flex Pro, Wattpilot Go, Wattpilot Home.

Manufacturer information last checked: October 2026.

All devices that work with SolarEdge