Growatt + Fronius Wattpilot

What Zerofy can do with Growatt and Fronius Wattpilot

In practice

• Zerofy adjusts the charging current of your Wattpilot but doesn’t switch phases. On a three-phase connection, solar charging needs at least about 4.1 kW of surplus (6 A × 3 × 230 V); on a single-phase connection about 1.4 kW.
• A typical Growatt home system (2.5–10 kW) needs a sunny midday to reach the 4.1 kW three-phase minimum. Wired single-phase, the charger starts from about 1.4 kW but charges at no more than about 3.7 kW.
• Zerofy gets new Growatt data every 5 minutes and adjusts accordingly. A minimum runtime and an activation threshold in Autopilot keep passing clouds from interrupting charging.
• Zerofy also shows your Growatt battery, so you can see whether surplus goes into the battery or into the car.
• If your car is connected to Zerofy too, turn on Autopilot for either the car or the charger, not both.
• In its own surplus mode the Wattpilot starts at 1.38 kW on one phase, adjusts in 0.23 kW steps and switches to three phases above 4.14 kW, where it steps in 0.69 kW; the switching level can be changed in the app. Via OCPP, Zerofy sets the charging power but not the phases, so the minimum is 6 A: about 1.4 kW single-phase or 4.1 kW three-phase.

What Growatt and Fronius Wattpilot offer on their own

Growatt: Growatt’s THOR wallboxes have a PV Linkage mode that charges from surplus solar, with or without topping up from the grid. It needs a CT or an Acrel or Eastron meter wired to the charger, and the minimum charging power is 1.4 kW single-phase or 4.1 kW three-phase.

Fronius Wattpilot: The Wattpilot’s own PV surplus charging needs a Fronius inverter (GEN24, Verto, or SnapINverter/IG with Datamanager 2.0) with a Fronius Smart Meter at the feed-in point, talking over the Solar API in the same network. Other inverter brands only work with an extra Fronius Smart Meter IP or Datamanager Box 2.0 plus Smart Meter; the Wattpilot then also appears in Fronius Solar.web.

Zerofy connects the two: it reads Growatt production and controls your Wattpilot to match, together with your other devices in one app, with dynamic tariffs and forecast-based Smart mode.

Setting up Growatt and Fronius Wattpilot in Zerofy

1. Connect Growatt

Zerofy connects to the Growatt cloud: you log in with your ShinePhone credentials.

1. Make sure your inverter is online and registered in the ShinePhone app.
2. In Zerofy, choose Growatt and log in with your ShinePhone username and password.

Good to know: Inverter data is supported; battery and meter data may only be partly available depending on the system. Battery control and using the battery in Autopilot are listed as coming soon for Growatt.

Step-by-step guide for Growatt

2. Connect Fronius Wattpilot

The Wattpilot connects to Zerofy via OCPP 1.6J; you enter the connection details from Zerofy in the Solar.wattpilot app.

1. In Zerofy, add a Fronius Wattpilot and copy the OCPP connection details.
2. In the Solar.wattpilot app, go to Internet → OCPP and enter the details.
3. Save and wait until the status shows the connection is established.

Step-by-step guide for Fronius Wattpilot

3. Turn on Autopilot

In Zerofy, open your Wattpilot, turn on Autopilot and choose Solar – or Smart to also use dynamic tariffs and forecasts. Set the priority, activation threshold and minimum runtime.

Dynamic tariffs

Zerofy can also run your Wattpilot on dynamic electricity prices (EPEX Spot or Nord Pool, e.g. Tibber or aWATTar) or on a fixed time-of-use tariff. Smart mode combines those prices with forecasts of your household consumption and your Growatt solar production.

Learn more about Smart Mode

About Growatt and Fronius Wattpilot

Growatt – Growatt (Shenzhen Growatt New Energy, China, founded 2011) makes string and hybrid inverters such as the MIN TL-X and MIN TL-XH series, the NEO microinverters and the NOAH 2000 balcony battery. Its own ecosystem, GroHome, adds the THOR wallboxes, APX HV batteries and the GroBoost heater controller. Monitoring app: ShinePhone.

Fronius Wattpilot – The Wattpilot is the EV charger of the Austrian inverter maker Fronius, built for solar charging with automatic 1/3-phase switching and surplus charging from 1.4 kW. The Flex has LAN and Wi-Fi, a §14a input and a Pro version with MID and Eichrecht; it is mainly sold through installers. Products: Fronius Wattpilot Flex Home, Wattpilot Flex Pro, Wattpilot Go, Wattpilot Home.

Manufacturer information last checked: October 2026.

All devices that work with Growatt