Weiheng + go-e

What Zerofy can do with Weiheng and go-e

In practice

• Zerofy can switch your go-e Charger between one and three phases. Solar charging can therefore start at about 1.4 kW of surplus (6 A on one phase) and move to three phases once the surplus passes about 4.1 kW.
• A typical Weiheng home system (3.6–13 kW) reaches the 1.4 kW single-phase minimum on most bright days; three-phase charging from about 4.1 kW needs a sunny midday or a larger system.
• Zerofy gets new Weiheng data every 5 minutes and adjusts accordingly. A minimum runtime and an activation threshold in Autopilot keep passing clouds from interrupting charging.
• Zerofy also shows your Weiheng battery, so you can see whether surplus goes into the battery or into the car.
• If your car is connected to Zerofy too, turn on Autopilot for either the car or the charger, not both.
• The go-eCharger charges from 6 A, about 1.4 kW on one phase and 4.1 kW on three. Zerofy charges single-phase up to about 3.7 kW of surplus and switches to three phases above that; go-e lists automatic phase switching for Gemini models and HOME V3, so older HOME units stay on the phases they are wired with.

What Weiheng and go-e offer on their own

Weiheng: WHES sells its own AC chargers (e.g. WH-ECA-7.0 with 7 kW, 32 A, plus a 22 kW model) that it describes as compatible with PV and battery systems, with load balancing. The ECOS app manages EV chargers, but WHES doesn’t publish how surplus charging works or which third-party wallboxes are supported.

go-e: go-e’s own route to surplus charging is the go-e Controller, which measures the house connection with six current sensors and works with any inverter brand, including automatic 1/3-phase switching. Without the Controller, go-e relies on external energy managers through its open API, Modbus TCP or OCPP.

Zerofy connects the two: it reads Weiheng production and controls your go-e Charger to match, together with your other devices in one app, with dynamic tariffs and forecast-based Smart mode.

Setting up Weiheng and go-e in Zerofy

1. Connect Weiheng

Zerofy connects through Weiheng’s partner cloud: you enter your system’s serial number in Zerofy, and Zerofy links the device and reads inverter, meter and battery data.

1. Make sure your Weiheng system is online.
2. In Zerofy, choose Weiheng and enter the serial number of your system.

2. Connect go-e

Zerofy uses the go-e Cloud HTTP API with your charger’s serial number and API token, sets the charging current and switches between one and three phases.

1. Update the charger to firmware 052 or later and the go-e app to 2.3 or later.
2. In the go-e app, go to Internet → Advanced Settings and turn on the Cloud HTTP API.
3. Copy the API token shown there and enter it in Zerofy together with the charger’s serial number.

Good to know: Supported are Gemini 2.0 (serial 400000+), Gemini (200000–399999) and HOME (050000–199999).

Step-by-step guide for go-e

3. Turn on Autopilot

In Zerofy, open your go-e Charger, turn on Autopilot and choose Solar – or Smart to also use dynamic tariffs and forecasts. Set the priority, activation threshold and minimum runtime.

Dynamic tariffs

Zerofy can also run your go-e Charger on dynamic electricity prices (EPEX Spot or Nord Pool, e.g. Tibber or aWATTar) or on a fixed time-of-use tariff. Smart mode combines those prices with forecasts of your household consumption and your Weiheng solar production.

Learn more about Smart Mode

About Weiheng and go-e

Weiheng – Weiheng (Jiangsu Weiheng Intelligent Technology, Wuxi, China) is a battery storage maker; in 2025 Weiheng Energy Storage and its home brand ECACTUS were merged into the WHES brand. For homes it sells all-in-one hybrid storage systems: the single-phase PP-S2 (3.6–10 kW, 4.99–19.9 kWh) and the three-phase PP-T1 (5–13 kW, 9.98–29.94 kWh). Monitoring app: ECOS.

go-e – go-e is an Austrian charger maker. The current go-eCharger Gemini 2.0 (11 or 22 kW) has documented local and cloud APIs, MQTT, Modbus TCP, a freely configurable OCPP backend and an eSIM; according to the data sheet it is not approved for the Netherlands, France or Italy. Products: go-eCharger Gemini 2.0, Gemini, HOME.

Manufacturer information last checked: October 2026.

All devices that work with Weiheng