SAJ + tado°

What Zerofy can do with SAJ and tado°

In practice

• Autopilot isn’t available for tado° yet, so Zerofy won’t run your tado° thermostats on solar surplus automatically. You can see SAJ production and tado° in one app and adjust the room temperature from there.
• A temperature you set from Zerofy works like a manual change in the tado° app: it overrides the tado° schedule for that zone with no end time, so the zone only goes back to its schedule when you resume it in the tado° app.

What SAJ and tado° offer on their own

SAJ: The SAJ eManager has two dry-contact (DO) outputs for a heat pump, switched by tasks you set up in the app. SAJ says Elekeeper supports heat pumps and water heaters but doesn’t list compatible models.

tado°: With the Heat Pump Optimizer X and the paid “Balance for Heat Pumps” service, tado° shifts heat pump operation into the hours its PV forecast expects solar power. The forecast uses the PV size, address, roof direction and tilt you enter plus the local weather forecast, not live inverter data; the Smart AC Control has no solar function.

Zerofy connects the two: it reads SAJ production and controls your tado° thermostats to match, together with your other devices in one app.

Setting up SAJ and tado° in Zerofy

1. Connect SAJ

Zerofy reads your plant from the SAJ cloud: you add Zerofy as a developer in the Elekeeper app and then enter your Plant ID in Zerofy.

1. In the Elekeeper app, tap ••• and open Plant Management.
2. Under Developer/Partner, paste the Developer ID shown in Zerofy and confirm access.
3. Copy your Plant ID from Plant Management and paste it into Zerofy.

Good to know: How fresh the data is depends on how often the SAJ cloud updates. For the battery, Zerofy supports forced charging but not switching the battery mode.

Step-by-step guide for SAJ

2. Connect tado°

Zerofy logs in to your tado° account and shows temperature and humidity of your tado° zones, and you can set the room temperature from Zerofy; Autopilot does not control tado° devices.

1. Set up your tado° devices in the tado° app.
2. In Zerofy, add Tado and log in with your tado° app credentials.

Good to know: Zerofy does not run tado° on solar surplus or dynamic prices; use it in Zerofy for monitoring and manual temperature changes.

Step-by-step guide for tado°

About SAJ and tado°

SAJ – SAJ (Guangzhou Sanjing Electric) is an inverter maker from Guangzhou, China. Homes usually have the H2 hybrid inverter with B2 battery or the HS2, HS3 or AS2 all-in-one storage systems; the eManager unit and the Caro wallbox tie them together. Monitoring app: Elekeeper.

tado° – tado° was founded in Munich in 2011 and makes smart thermostats, radiator thermostats, a heat pump controller (Heat Pump Optimizer X) and an infrared Smart AC Control for existing air conditioners. tado° says its products work with 95% of heating systems in Europe. Products: tado° Smart Thermostat X, Smart Radiator Thermostat X, Heat Pump Optimizer X, Smart AC Control.

Manufacturer information last checked: October 2026.

All devices that work with SAJ