SAJ + CTA

What Zerofy can do with SAJ and CTA

In practice

• When there’s enough surplus, Zerofy switches the relay and the heat pump receives the SG Ready signal. How it reacts – for example by heating the hot-water tank to a higher temperature – is set in the heat pump’s own controller.
• A heat pump draws roughly 1–3 kW while running, which a typical SAJ home system (3–10 kW) can cover on sunny days.
• Zerofy gets new SAJ data every 5 minutes. Heat pumps shouldn’t switch often, so set a minimum runtime in Autopilot.
• Zerofy also shows your SAJ battery, so you can see whether surplus goes into the battery or into the heat pump.
• CTA’s own tip for SG Ready operation: if rooms get too warm or too cold, change the upper temperature limit by 1 °C at a time and leave it for one to two days before adjusting again; agree the values with your heating installer.

What SAJ and CTA offer on their own

SAJ: The SAJ eManager has two dry-contact (DO) outputs for a heat pump, switched by tasks you set up in the app. SAJ says Elekeeper supports heat pumps and water heaters but doesn’t list compatible models.

CTA: For PV self-consumption, CTA connects its heat pumps to external energy management systems via a PV input, SG Ready or Modbus (Optiheat and Aeroheat). CTA publishes SG Ready instructions per model and a compatibility list for the Swiss Solar Manager gateway (Modbus TCP/RTU).

Zerofy connects the two: it reads SAJ production and controls your CTA heat pump to match, together with your other devices in one app, with dynamic tariffs and forecast-based Smart mode.

Setting up SAJ and CTA in Zerofy

1. Connect SAJ

Zerofy reads your plant from the SAJ cloud: you add Zerofy as a developer in the Elekeeper app and then enter your Plant ID in Zerofy.

1. In the Elekeeper app, tap ••• and open Plant Management.
2. Under Developer/Partner, paste the Developer ID shown in Zerofy and confirm access.
3. Copy your Plant ID from Plant Management and paste it into Zerofy.

Good to know: How fresh the data is depends on how often the SAJ cloud updates. For the battery, Zerofy supports forced charging but not switching the battery mode.

Step-by-step guide for SAJ

2. Connect CTA

The Zerofy docs have no CTA-specific guide; the documented way to control a CTA heat pump is Zerofy’s SG Ready integration, with a smart relay such as a Shelly wired to the heat pump’s SG Ready inputs.

1. Check in CTA’s SG Ready compatibility list that your model and controller (Optiplus, Optiplus 3, Aeroplus 2.0/2.1) are listed.
2. Have an electrician wire a smart relay (e.g. Shelly) to the heat pump’s SG Ready inputs.
3. Add the relay to Zerofy and configure it as SG Ready controller.

Good to know: CTA marks Optiheat Inverta units and several Aeroheat models as needing a software or controller update for SG Ready. For older or unlisted units, CTA says integration can mean extra cost, e.g. a controller replacement.

Step-by-step guide for CTA

3. Turn on Autopilot

In Zerofy, open your CTA heat pump, turn on Autopilot and choose Solar – or Smart to also use dynamic tariffs and forecasts. Set the priority, activation threshold and minimum runtime.

Dynamic tariffs

Zerofy can also run your CTA heat pump on dynamic electricity prices (EPEX Spot or Nord Pool, e.g. Tibber or aWATTar) or on a fixed time-of-use tariff. Smart mode combines those prices with forecasts of your household consumption and your SAJ solar production.

Learn more about Smart Mode

About SAJ and CTA

SAJ – SAJ (Guangzhou Sanjing Electric) is an inverter maker from Guangzhou, China. Homes usually have the H2 hybrid inverter with B2 battery or the HS2, HS3 or AS2 all-in-one storage systems; the eManager unit and the Caro wallbox tie them together. Monitoring app: Elekeeper.

CTA – CTA AG is a Swiss manufacturer of heat pumps and cooling machines, with production at its headquarters in Münsingen near Bern. Its home range covers Optiheat ground-source and water-source heat pumps and Aeroheat air-source heat pumps. Products: Optiheat (brine/water and water/water), Optiheat Inverta, Aeroheat (air/water, indoor and outdoor units), Aeroheat Inverta.

Manufacturer information last checked: October 2026.

All devices that work with SAJ