SAJ + SG Ready

What Zerofy can do with SAJ and SG Ready

In practice

• When there’s enough surplus, Zerofy switches the relay and the heat pump receives the SG Ready signal. How it reacts – for example by heating the hot-water tank to a higher temperature – is set in the heat pump’s own controller.
• A heat pump draws roughly 1–3 kW while running, which a typical SAJ home system (3–10 kW) can cover on sunny days.
• Zerofy gets new SAJ data every 5 minutes. Heat pumps shouldn’t switch often, so set a minimum runtime in Autopilot.
• Zerofy also shows your SAJ battery, so you can see whether surplus goes into the battery or into the heat pump.
• Set in the heat pump controller how many degrees the hot-water and heating setpoints rise in the boost state (“recommended operation”); the default differs by manufacturer. Fronius and Enphase only switch between normal and recommended operation, so the heat pump keeps its own minimum run times.

What SAJ and SG Ready offer on their own

SAJ: The SAJ eManager has two dry-contact (DO) outputs for a heat pump, switched by tasks you set up in the app. SAJ says Elekeeper supports heat pumps and water heaters but doesn’t list compatible models.

SG Ready: Several inverter energy managers drive SG Ready directly: Fronius (GEN24 or Datamanager 2.0 with Smart Meter and a 12 V relay), SMA Sunny Home Manager 2.0 (relay or I/O module), Huawei EMMA, SolarEdge Home Load Controller or Smart Energy Relay, Sungrow SH-RT hybrids (built-in DO relay) and the Enphase IQ Energy Router+. Most of them switch on a fixed surplus threshold.

Zerofy connects the two: it reads SAJ production and controls your SG Ready heat pump to match, together with your other devices in one app, with dynamic tariffs and forecast-based Smart mode.

Setting up SAJ and SG Ready in Zerofy

1. Connect SAJ

Zerofy reads your plant from the SAJ cloud: you add Zerofy as a developer in the Elekeeper app and then enter your Plant ID in Zerofy.

1. In the Elekeeper app, tap ••• and open Plant Management.
2. Under Developer/Partner, paste the Developer ID shown in Zerofy and confirm access.
3. Copy your Plant ID from Plant Management and paste it into Zerofy.

Good to know: How fresh the data is depends on how often the SAJ cloud updates. For the battery, Zerofy supports forced charging but not switching the battery mode.

Step-by-step guide for SAJ

2. Connect SG Ready

Zerofy switches the SG Ready inputs through a smart relay such as a Shelly that you connect to Zerofy; Autopilot then sends SG Ready signals based on solar surplus and low electricity prices.

1. Have an electrician wire a smart relay (e.g. Shelly) to the heat pump’s SG Ready inputs.
2. Add the relay to Zerofy.
3. Configure the relay as SG Ready controller in the app and turn on Autopilot.

Good to know: SG Ready gives Zerofy on/off-style states, not temperature readings or setpoints. To use all four states, the relay needs two channels, one per SG Ready input.

Step-by-step guide for SG Ready

3. Turn on Autopilot

In Zerofy, open your SG Ready heat pump, turn on Autopilot and choose Solar – or Smart to also use dynamic tariffs and forecasts. Set the priority, activation threshold and minimum runtime.

Dynamic tariffs

Zerofy can also run your SG Ready heat pump on dynamic electricity prices (EPEX Spot or Nord Pool, e.g. Tibber or aWATTar) or on a fixed time-of-use tariff. Smart mode combines those prices with forecasts of your household consumption and your SAJ solar production.

Learn more about Smart Mode

About SAJ and SG Ready

SAJ – SAJ (Guangzhou Sanjing Electric) is an inverter maker from Guangzhou, China. Homes usually have the H2 hybrid inverter with B2 battery or the HS2, HS3 or AS2 all-in-one storage systems; the eManager unit and the Caro wallbox tie them together. Monitoring app: Elekeeper.

SG Ready – SG Ready (Smart Grid Ready) is a label introduced in 2012 by the German Heat Pump Association (BWP) for heat pumps that an external controller can switch between four operating states via two contacts. It is a signalling convention, not a data protocol: the heat pump’s own controller decides how far to raise temperatures in the boost state. Products: Heat pumps with the SG Ready label (two potential-free control inputs), from many manufacturers.

Manufacturer information last checked: October 2026.

All devices that work with SAJ