Enphase + Beny

What Zerofy can do with Enphase and Beny

In practice

• Zerofy adjusts the charging current of your Beny charger but doesn’t switch phases. On a three-phase connection, solar charging needs at least about 4.1 kW of surplus (6 A × 3 × 230 V); on a single-phase connection about 1.4 kW.
• A typical Enphase home system (3–10 kW) needs a sunny midday to reach the 4.1 kW three-phase minimum. Wired single-phase, the charger starts from about 1.4 kW but charges at no more than about 3.7 kW.
• Zerofy gets new Enphase data every 5 minutes and adjusts accordingly. A minimum runtime and an activation threshold in Autopilot keep passing clouds from interrupting charging.
• Zerofy also shows your Enphase battery, so you can see whether surplus goes into the battery or into the car.
• If your car is connected to Zerofy too, turn on Autopilot for either the car or the charger, not both.
• The standard load-balancing kit is not the same as the Solar DLB box: only the solar version unlocks the PV and Hybrid modes. Via OCPP, Zerofy sets the charging power but not the phases, so on a three-phase BENY charging needs at least 6 A per phase, about 4.1 kW of surplus.

What Enphase and Beny offer on their own

Enphase: Enphase sells its own IQ EV Charger 2, shipping in 14 European markets since March 2025, with a Green Charging mode that uses only surplus solar and automatic 1-/3-phase switching, so charging can start from about 1.38 kW. Third-party chargers can be controlled via OCPP 1.6J through the IQ Energy Router (up to two chargers), but only models on Enphase’s supported list.

Beny: BENY’s own solar charging needs its Solar DLB box with current clamps at the house connection, configured in the Z-BOX app. It offers “PV” mode (keeps grid draw close to 0 A), “Hybrid” mode (solar plus grid within the DLB limit) and “Full speed”; it does not talk to the inverter.

Zerofy connects the two: it reads Enphase production and controls your Beny charger to match, together with your other devices in one app, with dynamic tariffs and forecast-based Smart mode.

Setting up Enphase and Beny in Zerofy

1. Connect Enphase

Zerofy connects to your system through the Enphase cloud: you log in with your Enphase Enlighten credentials and Zerofy reads PV production, meter (consumption) and battery data.

1. Make sure your system is online and you have an account on Enphase Enlighten.
2. In Zerofy, add an inverter, choose Enphase and log in with your Enlighten credentials.
3. Configure the meters: the grid meter as main meter (bi-directional or consumption), production as a sub meter of type production.

Step-by-step guide for Enphase

2. Connect Beny

Zerofy has a dedicated BENY entry in the app, which connects via OCPP; Zerofy can then start, stop and set the charging power.

1. In Zerofy, add a BENY charger and copy the OCPP URL.
2. Paste it into the OCPP settings of your charger’s configuration app.
3. Wait until the charger connects to Zerofy.

Step-by-step guide for Beny

3. Turn on Autopilot

In Zerofy, open your Beny charger, turn on Autopilot and choose Solar – or Smart to also use dynamic tariffs and forecasts. Set the priority, activation threshold and minimum runtime.

Dynamic tariffs

Zerofy can also run your Beny charger on dynamic electricity prices (EPEX Spot or Nord Pool, e.g. Tibber or aWATTar) or on a fixed time-of-use tariff. Smart mode combines those prices with forecasts of your household consumption and your Enphase solar production.

Learn more about Smart Mode

About Enphase and Beny

Enphase – Enphase Energy (Fremont, California) makes microinverters: each panel gets its own IQ8 unit of about 300–330 VA, connected through an IQ Gateway. The AC-coupled IQ Battery 5P adds storage in 5 kWh steps, and everything is monitored in the Enphase App (Enlighten). Monitoring app: Enphase App / Enlighten.

Beny – BENY is a Chinese maker of low-cost wallboxes with open OCPP 1.6J, Wi-Fi, Bluetooth and an optional load-balancing kit. It is sold mainly through regional importers and installers, so availability and support depend on your local partner. Products: BENY BCP smart wallbox (7.4 / 22 kW).

Manufacturer information last checked: October 2026.

All devices that work with Enphase