Sungrow + myStrom

What Zerofy can do with Sungrow and myStrom

In practice

• Solar mode switches your myStrom switch on when there’s surplus, following your priority order and minimum runtime. Smart mode instead runs for a set number of minutes within the hours you allow.
• A myStrom plug can also measure a balcony solar system: set it as balcony solar meter in Zerofy.
• With a typical Sungrow home system (3–10 kW), plug loads get surplus on most sunny days; use priorities to decide whether they or bigger devices such as an EV charger come first.
• Zerofy gets new Sungrow data every 5 minutes and adjusts accordingly. A minimum runtime and an activation threshold in Autopilot keep passing clouds from interrupting switching.
• Zerofy also shows your Sungrow battery, so you can see whether surplus goes into the battery or into your appliances.
• If you have a plug-in balcony PV system, plug it into a WiFi Switch and set that switch as balcony solar meter in Zerofy, so its production is counted in your energy flows.

What Sungrow and myStrom offer on their own

Sungrow: The same DO relay can switch any other load through a contactor in Timing, Switch or Intelligent Mode; there is one relay per inverter.

myStrom: The myStrom app records mini-PV production measured by a WiFi Switch every 30 seconds, and “Solar Actions” and “Power Actions” can switch other myStrom devices on these values, e.g. allow e-bike charging from 200 W; this needs the myStrom PLUS subscription (EUR 3.49/year). Whole-house surplus control comes from energy management partners such as Solar Manager or clever-PV, not from an inverter maker.

Zerofy connects the two: it reads Sungrow production and controls your myStrom switch to match, together with your other devices in one app, with dynamic tariffs and forecast-based Smart mode.

Setting up Sungrow and myStrom in Zerofy

1. Connect Sungrow

Zerofy connects to your Sungrow system through the iSolarCloud cloud, using your iSolarCloud login.

1. Make sure your Sungrow inverter is online and registered in iSolarCloud.
2. Add Sungrow in Zerofy and log in with your iSolarCloud credentials.

Step-by-step guide for Sungrow

2. Connect myStrom

Zerofy connects to your myStrom account; it switches the plugs on and off, records their power every 5 minutes and lets Autopilot run them on solar surplus or in Smart mode.

1. Set up new myStrom plugs in the myStrom app.
2. In Zerofy, add myStrom and link your myStrom account.

Step-by-step guide for myStrom

3. Turn on Autopilot

In Zerofy, open your myStrom switch, turn on Autopilot and choose Solar – or Smart to also use dynamic tariffs and forecasts. Set the priority, activation threshold and minimum runtime.

Dynamic tariffs

Zerofy can also run your myStrom switch on dynamic electricity prices (EPEX Spot or Nord Pool, e.g. Tibber or aWATTar) or on a fixed time-of-use tariff. Smart mode combines those prices with forecasts of your household consumption and your Sungrow solar production.

Learn more about Smart Mode

About Sungrow and myStrom

Sungrow – Chinese inverter and storage maker based in Hefei. Homes typically have an SH-RS single-phase hybrid inverter (3–6 kW) or an SH-RT three-phase hybrid inverter (5–10 kW) with the SBR battery (6.4–25.6 kWh, 3.2 kWh modules), connected to the cloud through a WiNet-S/S2 dongle. Monitoring app: Sungrow iSolarCloud.

myStrom – myStrom AG is a Swiss company based in Zurich, founded in 2011. Its WiFi Switch is a smart plug for up to 16 A that switches appliances and measures their power, and it is also used to measure the output of plug-in balcony PV systems. Products: myStrom WiFi Switch (CH and Schuko versions), WiFi Switch Zero, WiFi Switch Ex (outdoor, Wieland connector for mini-PV).

Manufacturer information last checked: October 2026.

All devices that work with Sungrow