Rotenso Aquami Split

Photo: Rotenso

Air/water splitR32

Rotenso Aquami Split

Air-to-water split · 7 models · PL

R32 split of an outdoor unit from 4.25 to 16 kW at A7/W35 and a wall-hung hydrobox with a 9 kW heater in three steps, flow up to 65 °C and operation down to -25 °C. Rotenso lists SG Ready and Keymark certificates, cascading and a "Modbus Protocol" feature without stating the transport; control via the Reni wired controller or the iLetComfort app.

Output4.3–16 kW
SCOP 35 °C–
SCOP 55 °C–
Max. flow65 °C

Datasheet Product page All Rotenso heat pumps

Grant lists

Grants depend on the exact model being on the official list. The counts below are the entries of this series we found in each list.

BAFA WEP (Germany)

No model on the list

No model of this series is in the BAFA Wärmeerzeuger-Portal, so it cannot be funded under the German BEG grant.

checked November 4, 2026

ZUM (Poland)

7 models listed

7 models of this series are on the Lista ZUM, which the Polish Czyste Powietrze grant requires.

checked November 4, 2026 · See the entries

Specifications

TypeAir-to-water split
Heating output (datasheet)4.3–16 kW
SCOP at 35 °C–
SCOP at 55 °C–
RefrigerantR32 (GWP 675)
Outdoor sound power56–68 dB(A)
Max. flow temperature65 °C
Built-in backup heater9 kW
MarketsPL

Heating output is the figure in the manufacturer's datasheet; the basis (nominal output at A7/W35 or B0/W35, or design heat load) differs between brands, so check the datasheet before comparing. * = design heat load Pdesignh at 35 °C from the BAFA portal.

Control and connectivity

SG ReadyYes
ModbusNot documented
EEBUSNot documented
Cloud APInot confirmed (iLetComfort) – Rotenso says the app comes from a third-party developer
§14a EnWG controlnot confirmed
Local interfacesSG Ready

Source: rotenso.com/pl/produkt/pompa-ciepla-rotenso-aquami-split/ · thermosilesia.pl/assets/default/system_object_files/0f99b... · thermosilesia.pl/assets/default/system_object_files/0c50d...

Zerofy

Via SG Ready

Zerofy has no native Rotenso integration yet, but this series has an SG Ready input: Zerofy can switch it through a Shelly relay on the SG Ready terminals.

Rotenso in Zerofy

Models in this series

Model codes as the manufacturer documents them. The official list entries, with their own naming, follow below.

AQS40X1o + AQS60X13iAQS60X1o + AQS60X13iAQS80X1o + AQS100X13iAQS100X1o + AQS100X13iAQS120X3o + AQS160X13iAQS140X3o + AQS160X13iAQS160X3o + AQS160X13i

Models on the ZUM list 7

On the Lista ZUM on November 4, 2026, with the list's own device number.

ModelZUM id
AQS100X1o R14 + AQS100X13i R14PW-814516
AQS120X3o R14 +AQS160X13i R14PW-214675
AQS140X3o R14 + AQS160X13i R14PW-014676
AQS160X3o R14 + AQS160X13i R14PW-814677
AQS40X1o R14 + AQS60X13i R14PW-212332
AQS60X1o R14 + AQS60X13i R14PW-714673
AQS80X1o R14 + AQS100X13i R14PW-914672

Entries as published in the official lists on the date shown; names and numbers are copied verbatim. Check the list for your exact model before you order.

Sources

  1. Datasheet: thermosilesia.pl/assets/default/system_object_files/0f99bef8073b871cc24eac61e...
  2. Product page: rotenso.com/pl/produkt/pompa-ciepla-rotenso-aquami-split/
  3. Control and connectivity: rotenso.com/pl/produkt/pompa-ciepla-rotenso-aquami-split/
  4. Control and connectivity: thermosilesia.pl/assets/default/system_object_files/0f99bef8073b871cc24eac61e...
  5. Control and connectivity: thermosilesia.pl/assets/default/system_object_files/0c50d9d93d532fa8fb447e7b1...
  6. BAFA Wärmeerzeuger-Portal – Wärmepumpen – checked November 4, 2026
  7. Lista ZUM (Instytut Ochrony Środowiska) – checked November 4, 2026
  8. EEBUS certified devices – checked November 2, 2026

All figures are taken from the manufacturers' datasheets and the official BAFA and ZUM lists on the date shown and may have changed since. This is not grant advice – check the list and your grant conditions before you order. Zerofy is not affiliated with any of the manufacturers listed.

SG Ready is a label of the Bundesverband Wärmepumpe (BWP) e.V.; “Yes” means the manufacturer documents the two-input interface or declares it on the BAFA portal, not that the series carries the BWP label – the label list is at waermepumpe.de. EEBUS is a standard of the EEBus Initiative e.V.; Modbus is a registered trademark of Schneider Electric, licensed to the Modbus Organization. Product names, logos and photos belong to their manufacturers and are shown to identify the products. Grant data: BAFA Wärmeerzeuger-Portal and Lista ZUM (IOŚ-PIB) as of the dates shown; the SCOP at 55 °C in the BAFA tables is calculated by Zerofy from the portal's ηs value.

Heat with your own solar power

Zerofy moves your heat pump's runtime into the hours with surplus solar power or low prices – automatically.

Get Zerofy